| komatsu 425-54-33260 MAT | da min:180.2 mm; Characteristic outer ring frequency, BPF0:11.12 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:98.9 kN; Characteristic cage frequency, FTF:0.44 Hz; Radial clearance class:C3; Nref:2,200 rpm; D:260 mm; Max operating temperature, Tmax:200 °C; B:67 mm; |
| komatsu 234-54-53770 MAT | Machining:No; Surface Treatment:No; Bearing Unit, Type:Square flange shape; Grease Type:SH33M; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Stroke:No; Basic Load Rating, Dynamic Rating(N):133000; Basic Load Rating, Static Rating(N):96800; Bearing Inner Dia. Shape:Cylindrical Bore Set; |
| komatsu 17A-979-2881 MAT | da min:180.2 mm; Characteristic outer ring frequency, BPF0:11.12 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:98.9 kN; Characteristic cage frequency, FTF:0.44 Hz; Radial clearance class:C3; Nref:2,200 rpm; D:260 mm; Max operating temperature, Tmax:200 °C; B:67 mm; |
| komatsu 415-844-2210 MAT | B:25 mm; Dynamic Load Rating:86.3 kN; Static Load Rating:183.5 kN; da:237 mm; Radius:2 mm; D:280 mm; d:220 mm; Da:259 mm; Oil Holes:2.5 mm; |
| komatsu 3EF-52-61180KF MAT | H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8"; |
| komatsu 8210-54-1610 MAT | a:58 mm; Nlim (oil):8,400 rpm; Characteristic inner ring frequency, BPFI:16.19 Hz; r1s min:1 mm; rs min:2 mm; Fatigue limit load, Cu:5.2 kN; Axial displacement K Factor:0.34; d:160 mm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:13.81 Hz; |
| komatsu 22J-54-36521 MAT | B:25 mm; Dynamic Load Rating:86.3 kN; Static Load Rating:183.5 kN; da:237 mm; Radius:2 mm; D:280 mm; d:220 mm; Da:259 mm; Oil Holes:2.5 mm; |
| komatsu 203-973-6150 MAT | Characteristic inner ring frequency, BPFI:7.75 Hz; EAN:4547359134179; d1:34.5 mm; Brand:NTN; Static load, C0:27.7 kN; Minimum Buy Quantity:N/A; Nlim (grease):13,000 rpm; D:52 mm; Da max:47 mm; Fatigue limit load, Cu:3.4 kN; |
| komatsu 22L-973-1820 MAT | H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8"; |
| komatsu 22J-973-1G11 MAT | Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Width T(mm):55 ～ 80; Number of Bearings:Double; Bearing Part Number:6204; |