| komatsu 569-54-85780 MAT | Machining:No; Surface Treatment:No; Bearing Unit, Type:Square flange shape; Grease Type:SH33M; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Stroke:No; Basic Load Rating, Dynamic Rating(N):133000; Basic Load Rating, Static Rating(N):96800; Bearing Inner Dia. Shape:Cylindrical Bore Set; |
| komatsu 419-54-52630 MAT | Characteristic inner ring frequency, BPFI:7.75 Hz; EAN:4547359134179; d1:34.5 mm; Brand:NTN; Static load, C0:27.7 kN; Minimum Buy Quantity:N/A; Nlim (grease):13,000 rpm; D:52 mm; Da max:47 mm; Fatigue limit load, Cu:3.4 kN; |
| komatsu 21U-973-3980 MAT | C0:6.65 kN; H:30.2 mm; Dz:54 mm; T max.:200 °C; C:12.8 kN; d:19.05 mm; A:40 mm; Designation of housing:PA204N-; Designation of bearing:US204-12G2T20; J:52 mm; |
| komatsu 41E-54-22830 MAT | Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Width T(mm):55 ～ 80; Number of Bearings:Double; Bearing Part Number:6204; |
| komatsu 21X-54-33270 MAT | Type:Bearings with Housin; Seals:ZZ (Double Shield); Bearing Part Number:698; Bearing Used:Deep Groove Ball Bea; Width T(mm):25; Flange Shape:Compact Type; Number of Bearings:Double; Bearing Retained:Yes (with retaining; |
| komatsu 42A-54-74240 MAT | H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8"; |
| komatsu DK105649-0010 AUTOMATIC TIMER | Characteristic inner ring frequency, BPFI:7.75 Hz; EAN:4547359134179; d1:34.5 mm; Brand:NTN; Static load, C0:27.7 kN; Minimum Buy Quantity:N/A; Nlim (grease):13,000 rpm; D:52 mm; Da max:47 mm; Fatigue limit load, Cu:3.4 kN; |
| komatsu 416-Z21-2220 MAT | Max operating temperature, Tmax:120 °C; d1:202.3 mm; Brand:SNR; f0:16.4; Nlim:4,000 rpm; Characteristic cage frequency, FTF:0.45 Hz; rs min:1.5 mm; Nref:2,900 rpm; D1:228.6 mm; ra max:1.5 mm; |
| komatsu 22M-54-21980 MAT | Number of Bearings:Double; Bearing I.D. d(mm):25; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Width T(mm):45 ～ 80; Housing Material:1045 Carbon Steel; |
| komatsu 43A-54-13330 MAT | Machining:No; Surface Treatment:No; Bearing Unit, Type:Square flange shape; Grease Type:SH33M; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Stroke:No; Basic Load Rating, Dynamic Rating(N):133000; Basic Load Rating, Static Rating(N):96800; Bearing Inner Dia. Shape:Cylindrical Bore Set; |