komatsu 21U-973-6920 MAT	H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8";
komatsu 22P-53-13773 MAT	Number of Bearings:Double; Bearing I.D. d(mm):25; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Width T(mm):45 ～ 80; Housing Material:1045 Carbon Steel;
komatsu 423-54-52631 MAT	da min:180.2 mm; Characteristic outer ring frequency, BPF0:11.12 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:98.9 kN; Characteristic cage frequency, FTF:0.44 Hz; Radial clearance class:C3; Nref:2,200 rpm; D:260 mm; Max operating temperature, Tmax:200 °C; B:67 mm;
komatsu 20Y-53-81340 MAT	H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8";
komatsu 195-54-64751 MAT	B:25 mm; Dynamic Load Rating:86.3 kN; Static Load Rating:183.5 kN; da:237 mm; Radius:2 mm; D:280 mm; d:220 mm; Da:259 mm; Oil Holes:2.5 mm;
komatsu 416-944-4330 MAT	Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Width T(mm):55 ～ 80; Number of Bearings:Double; Bearing Part Number:6204;
komatsu 22G-973-1260 MAT	Machining:No; Surface Treatment:No; Bearing Unit, Type:Square flange shape; Grease Type:SH33M; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Stroke:No; Basic Load Rating, Dynamic Rating(N):133000; Basic Load Rating, Static Rating(N):96800; Bearing Inner Dia. Shape:Cylindrical Bore Set;
komatsu 3BP-50-21410KF MAT	C0:6.65 kN; H:30.2 mm; Dz:54 mm; T max.:200 °C; C:12.8 kN; d:19.05 mm; A:40 mm; Designation of housing:PA204N-; Designation of bearing:US204-12G2T20; J:52 mm;
komatsu 207-53-82510 MAT	Number of Bearings:Double; Bearing I.D. d(mm):25; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Width T(mm):45 ～ 80; Housing Material:1045 Carbon Steel;
komatsu 21W-959-9430 MAT	C0:6.65 kN; H:30.2 mm; Dz:54 mm; T max.:200 °C; C:12.8 kN; d:19.05 mm; A:40 mm; Designation of housing:PA204N-; Designation of bearing:US204-12G2T20; J:52 mm;