| komatsu 234-843-2270 MAT | B:25 mm; Dynamic Load Rating:86.3 kN; Static Load Rating:183.5 kN; da:237 mm; Radius:2 mm; D:280 mm; d:220 mm; Da:259 mm; Oil Holes:2.5 mm; |
| komatsu 21X-973-3351 MAT | Max operating temperature, Tmax:120 °C; d1:202.3 mm; Brand:SNR; f0:16.4; Nlim:4,000 rpm; Characteristic cage frequency, FTF:0.45 Hz; rs min:1.5 mm; Nref:2,900 rpm; D1:228.6 mm; ra max:1.5 mm; |
| komatsu 418-V89-2320 MAT | da min:180.2 mm; Characteristic outer ring frequency, BPF0:11.12 Hz; Number of lubrication holes:3; Fatigue limit load, Cu:98.9 kN; Characteristic cage frequency, FTF:0.44 Hz; Radial clearance class:C3; Nref:2,200 rpm; D:260 mm; Max operating temperature, Tmax:200 °C; B:67 mm; |
| komatsu 3BB-50-A6360KF MAT | C0:6.65 kN; H:30.2 mm; Dz:54 mm; T max.:200 °C; C:12.8 kN; d:19.05 mm; A:40 mm; Designation of housing:PA204N-; Designation of bearing:US204-12G2T20; J:52 mm; |
| komatsu 426-54-53970 MAT | Number of Bearings:Double; Bearing I.D. d(mm):25; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Width T(mm):45 ～ 80; Housing Material:1045 Carbon Steel; |
| komatsu 423-54-52631 MAT | Characteristic inner ring frequency, BPFI:7.75 Hz; EAN:4547359134179; d1:34.5 mm; Brand:NTN; Static load, C0:27.7 kN; Minimum Buy Quantity:N/A; Nlim (grease):13,000 rpm; D:52 mm; Da max:47 mm; Fatigue limit load, Cu:3.4 kN; |
| komatsu 203-54-63921 MAT | Max operating temperature, Tmax:120 °C; d1:202.3 mm; Brand:SNR; f0:16.4; Nlim:4,000 rpm; Characteristic cage frequency, FTF:0.45 Hz; rs min:1.5 mm; Nref:2,900 rpm; D1:228.6 mm; ra max:1.5 mm; |
| komatsu 567-54-41390 MAT | Shape:Flange Type; Type:Bearings with Housin; Flange Shape:Round Type; Seals:DD (Contact Rubber S; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing I.D. d(mm):17; Flange O.D. H(φ):50; Holder Surface Treatment:Clear Anodize; |
| komatsu 234-843-2270 MAT | H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8"; |
| komatsu 20Y-54-83490 MAT | Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Width T(mm):55 ～ 80; Number of Bearings:Double; Bearing Part Number:6204; |