komatsu 11Y-54-27131 MAT	Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Width T(mm):55 ～ 80; Number of Bearings:Double; Bearing Part Number:6204;
komatsu 3FD-50-27260KF 0FMAT	Type:Bearings with Housin; Seals:ZZ (Double Shield); Bearing Part Number:698; Bearing Used:Deep Groove Ball Bea; Width T(mm):25; Flange Shape:Compact Type; Number of Bearings:Double; Bearing Retained:Yes (with retaining;
komatsu 20A-54-21711 MAT	C0:6.65 kN; H:30.2 mm; Dz:54 mm; T max.:200 °C; C:12.8 kN; d:19.05 mm; A:40 mm; Designation of housing:PA204N-; Designation of bearing:US204-12G2T20; J:52 mm;
komatsu 22N-958-2790 MAT	Machining:No; Surface Treatment:No; Bearing Unit, Type:Square flange shape; Grease Type:SH33M; Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Stroke:No; Basic Load Rating, Dynamic Rating(N):133000; Basic Load Rating, Static Rating(N):96800; Bearing Inner Dia. Shape:Cylindrical Bore Set;
komatsu 23D-54-31810 MAT	C0:6.65 kN; H:30.2 mm; Dz:54 mm; T max.:200 °C; C:12.8 kN; d:19.05 mm; A:40 mm; Designation of housing:PA204N-; Designation of bearing:US204-12G2T20; J:52 mm;
komatsu 22J-54-19311 MAT	Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Shape:Flanged Pilot Type; Bearing I.D. d(mm):20; Seals:VV (Non-Contact Rubb; Width T(mm):55 ～ 80; Number of Bearings:Double; Bearing Part Number:6204;
komatsu 21R-54-21410 MAT	a:58 mm; Nlim (oil):8,400 rpm; Characteristic inner ring frequency, BPFI:16.19 Hz; r1s min:1 mm; rs min:2 mm; Fatigue limit load, Cu:5.2 kN; Axial displacement K Factor:0.34; d:160 mm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:13.81 Hz;
komatsu 426-54-53970 MAT	H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8";
komatsu 234-843-2270 MAT	H:69.9 mm; Z:91.3 mm; E:20 mm; Dz:120 mm; Designation of housing:PAE212N-; Recommended tightening torque for set screw:16.8 Nm; J:118 mm; L1:32 mm; d:61.91 mm; G:R1/8";
komatsu 154-979-2341 MAT	B:25 mm; Dynamic Load Rating:86.3 kN; Static Load Rating:183.5 kN; da:237 mm; Radius:2 mm; D:280 mm; d:220 mm; Da:259 mm; Oil Holes:2.5 mm;