Komatsu Flange flange 714-07-14531 Flange flange | Z:70.5 mm; Designation of open end cover:SCOE206-30; L:85 mm; E:18 mm; G:M6x1; d1:44.1 mm; B:36.4 mm; Designation of housing:PG206N-; T min.:-20 °C; A:48 mm; |
Komatsu Flange flange KB20132-60522 Flange flange | Weight:0.58 kg; A1:11 mm; C0:7.88 kN; s1:13.5 mm; d:23.81 mm; H:124 mm; e:19 mm; A:29.3 mm; S:7.5 mm; G:R1/8"; |
Komatsu Flange flange 198-12-41140 Flange flange | C:24.9 kN; s1:20.7 mm; d1:52 mm; T max.:100 °C; B:19 mm; Weight:1.4 kg; d:35 mm; e:19 mm; Z:29.6 mm; A1:15 mm; |
Komatsu Flange flange 20Y-970-4360 Flange flange | Characteristic outer ring frequency, BPF0:10.61 Hz; Dynamic load, C:2,060 kN; Y1:2.95; ra max:3 mm; B:104 mm; Max operating temperature, Tmax:200 °C; Da max:385.4 mm; D:400 mm; Radial clearance class:C3; Mass:45.9 kg; |
Komatsu Flange flange 569-50-63182 Flange flange | J:148 mm; Recommended tightening torque for set screw:8 Nm; A2:52.2 mm; T min.:-20 °C; L:108 mm; A:38 mm; N:15mm; s1:24.6 mm; G:M6x1; e:22 mm; |
Komatsu Flange flange 23A-22-11132 Flange flange | T min.:-40 °C; Z:17 mm; L1:50 mm; C0:7.88 kN; L:140 mm; H1:16 mm; A:50 mm; Weight:1.21 kg; T max.:100 °C; N:13mm; |
Komatsu Flange flange 103-27-21232 Flange flange | s1:30.5 mm; Designation of housing:PH204-; T min.:-40 °C; J:95 mm; H:70 mm; S:17 mm; L1:48 mm; A:40 mm; B1:43.5 mm; H2:101 mm; |
Komatsu Flange flange 8233-62-3260 Flange flange | T min.:-40 °C; Z:17 mm; L1:50 mm; C0:7.88 kN; L:140 mm; H1:16 mm; A:50 mm; Weight:1.21 kg; T max.:100 °C; N:13mm; |
Komatsu Flange flange 21M-04-15131 Flange flange | Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Width T(mm):50; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Flange O.D. H(φ):52; Number of Bearings:Double; RoHS:6; Holder Surface Treatment:Electroless Nickel P; Bearing Material:[Steel] Steel; |
Komatsu Flange flange 799-401-2210 Flange flange | Outer Ring Type:Flat; Days to Ship:Quote; Lubricant:Presence; Raceway Ring Shape:Needle Roller; Number of Raceway Ring Rows:Single Row; Load Direction:Radial; Post-assembly heat treatment (pre-bent type):No; Premium shell bearing:No; Format symbol:HMK; |