komatsu 46B-ARS-1410KF HOLDER	Seals:VV (Non-Contact Rubb; Bearing Material:[Steel] Steel; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Part Number:6204; Volume Discount:Available; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Width T(mm):70; Type:Bearings with Housin;
komatsu 21T-25-67370 HOLDER	T max.:100 °C; Weight:0.54 kg; N:12mm; s1:15.5 mm; T min.:-20 °C; L:58.5 mm; J:90 mm; B:31 mm; C0:6.8 kN; A2:33.3 mm;
komatsu 21T-72-74250 HOLDER	Basic Dynamic Load Rating(N):16000; Size Standards:Metric System; B:14; Type:Ball; RoHS:6; Max. Allowed rpm(rpm):12000; Specifications/Environment:Standard; D:62; Load Direction:Radial;
komatsu 45B-ARS-1580NKKF HOLDER	C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;
komatsu BT415114050 HOLDER	N:11,5mm; d:28.58 mm; s1:27.8 mm; J:117 mm; A:24 mm; A2:39.7 mm; S:9 mm; G:R1/8"; C:19.5 kN; B1:35.7 mm;
komatsu 566-15-42160 HOLDER	B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C;
komatsu 21W-70-48272 HOLDER	da min:40 mm; da max:42 mm; Static load, C0:10.3 kN; B:14 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Max operating temperature, Tmax:110 °C; Da max:57 mm; ra max:1 mm; Fatigue limit load, Cu:0.47 kN; Mass:0.16 kg;
komatsu 6212-11-3212 HOLDER ASS'Y	Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit, Type:Insert Bearing Unit; Accessory:With cast iron cover; Stroke:No; d:45; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Surface Treatment:No; Diameter series symbol:Used for Light load;
komatsu NJ16610-GY91DKF HOLDER ASS'Y	Seal:Silicone; Basic Load Rating, Dynamic Rating(N):34100; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Days to Ship:10 Days; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Pillow Type, Category:Centre Height; Fit:J7; Bearing Inner Dia. Shape:Cylindrical Bore Set;
komatsu 562-40-3A360 HOLDER	C:31.85 kN; s1:24.6 mm; Designation of closed end cover:SCC209; L1:62 mm; Designation of housing:PH209N-; Weight:3.35 kg; A:70 mm; J:146 mm; Designation of bearing:UC209-26G2L4; G:M6x1;