| komatsu SD1331-03410X9 BRUSH HOLDER AS | B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C; |
| komatsu YM172527-42301 HOLDER ASS'Y | C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |
| komatsu 6162-13-3712 HOLDER ASS'Y | Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; RoHS:6; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Flange O.D. H(φ):41; Flange Shape:Square Type; |
| komatsu 11Y-30-44550 HOLDER | Da max:65.5 mm; Mass:0.36 kg; Min operating temperature, Tmin:-30 °C; Brand:NTN; B:19 mm; Nlim (grease):6,600 rpm; ra max:1 mm; da min:36.5 mm; rs min:1.1 mm; Dynamic load, C:26.7 kN; |
| komatsu 427-22-12560 HOLDER | T max.:100 °C; Weight:0.54 kg; N:12mm; s1:15.5 mm; T min.:-20 °C; L:58.5 mm; J:90 mm; B:31 mm; C0:6.8 kN; A2:33.3 mm; |
| komatsu 8234-70-5390 HOLDER | Da max:65.5 mm; Mass:0.36 kg; Min operating temperature, Tmin:-30 °C; Brand:NTN; B:19 mm; Nlim (grease):6,600 rpm; ra max:1 mm; da min:36.5 mm; rs min:1.1 mm; Dynamic load, C:26.7 kN; |
| komatsu 195-43-45761 HOLDER | T min.:-20 °C; Adapter sleeve reference:H2307; d:30 mm; A:34 mm; s1:22.5 mm; J:130 mm; d1:52 mm; e:19 mm; Designation of housing:FL207N-; H:161 mm; |
| komatsu 566-43-17720 HOLDER | Seals:VV (Non-Contact Rubb; Bearing Material:[Steel] Steel; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Part Number:6204; Volume Discount:Available; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Width T(mm):70; Type:Bearings with Housin; |
| komatsu 2A5-06-11441 HOLDER | da min:40 mm; da max:42 mm; Static load, C0:10.3 kN; B:14 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Max operating temperature, Tmax:110 °C; Da max:57 mm; ra max:1 mm; Fatigue limit load, Cu:0.47 kN; Mass:0.16 kg; |
| komatsu 58C-22-12371 HOLDER | C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |