| komatsu 793-415-1250 HOLDER | C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |
| komatsu 569-22-62560 HOLDER | da min:40 mm; da max:42 mm; Static load, C0:10.3 kN; B:14 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Max operating temperature, Tmax:110 °C; Da max:57 mm; ra max:1 mm; Fatigue limit load, Cu:0.47 kN; Mass:0.16 kg; |
| komatsu 8295-70-3291 HOLDER | T min.:-20 °C; Adapter sleeve reference:H2307; d:30 mm; A:34 mm; s1:22.5 mm; J:130 mm; d1:52 mm; e:19 mm; Designation of housing:FL207N-; H:161 mm; |
| komatsu 793-615-1220 HOLDER | Type:Bearings with Housin; Flange O.D. H(φ):38; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Shape:Flanged Pilot Type; Bearing Part Number:605; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; |
| komatsu 8295-70-5420 HOLDER | Da max:65.5 mm; Mass:0.36 kg; Min operating temperature, Tmin:-30 °C; Brand:NTN; B:19 mm; Nlim (grease):6,600 rpm; ra max:1 mm; da min:36.5 mm; rs min:1.1 mm; Dynamic load, C:26.7 kN; |
| komatsu 195-43-45761 HOLDER | T min.:-20 °C; Adapter sleeve reference:H2307; d:30 mm; A:34 mm; s1:22.5 mm; J:130 mm; d1:52 mm; e:19 mm; Designation of housing:FL207N-; H:161 mm; |
| komatsu 561-22-11240 HOLDER | B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C; |
| komatsu 196-72-11260 HOLDER | Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit, Type:Insert Bearing Unit; Accessory:With cast iron cover; Stroke:No; d:45; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Surface Treatment:No; Diameter series symbol:Used for Light load; |
| komatsu 2A5-06-11451 HOLDER | Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; RoHS:6; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Flange O.D. H(φ):41; Flange Shape:Square Type; |
| komatsu 428-22-11240 HOLDER | C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |