komatsu 262-70-27190 HOLDER	Type:Bearings with Housin; Flange O.D. H(φ):38; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Shape:Flanged Pilot Type; Bearing Part Number:605; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P;
komatsu 2A5-06-11451 HOLDER	Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; RoHS:6; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Flange O.D. H(φ):41; Flange Shape:Square Type;
komatsu 17A-30-43413 HOLDER	B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C;
komatsu 17A-27-11441 HOLDER	Da max:65.5 mm; Mass:0.36 kg; Min operating temperature, Tmin:-30 °C; Brand:NTN; B:19 mm; Nlim (grease):6,600 rpm; ra max:1 mm; da min:36.5 mm; rs min:1.1 mm; Dynamic load, C:26.7 kN;
komatsu 175-14-14160 HOLDER	da min:40 mm; da max:42 mm; Static load, C0:10.3 kN; B:14 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Max operating temperature, Tmax:110 °C; Da max:57 mm; ra max:1 mm; Fatigue limit load, Cu:0.47 kN; Mass:0.16 kg;
komatsu 14X-54-73611 HOLDER	B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C;
komatsu 3EA-63-11110KF HOLDER	N:11,5mm; d:28.58 mm; s1:27.8 mm; J:117 mm; A:24 mm; A2:39.7 mm; S:9 mm; G:R1/8"; C:19.5 kN; B1:35.7 mm;
komatsu 791-463-1100 HOLDER	Seal:Silicone; Basic Load Rating, Dynamic Rating(N):34100; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Days to Ship:10 Days; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Pillow Type, Category:Centre Height; Fit:J7; Bearing Inner Dia. Shape:Cylindrical Bore Set;
komatsu MFP0000814 HOLDER	Seal:Silicone; Basic Load Rating, Dynamic Rating(N):34100; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Days to Ship:10 Days; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Pillow Type, Category:Centre Height; Fit:J7; Bearing Inner Dia. Shape:Cylindrical Bore Set;
komatsu MR152-0005-118 HOLDER	C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;