| komatsu 14X-27-51330 HOLDER | Type:Bearings with Housin; Flange O.D. H(φ):38; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Shape:Flanged Pilot Type; Bearing Part Number:605; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; |
| komatsu 262-70-75410 HOLDER | Da max:65.5 mm; Mass:0.36 kg; Min operating temperature, Tmin:-30 °C; Brand:NTN; B:19 mm; Nlim (grease):6,600 rpm; ra max:1 mm; da min:36.5 mm; rs min:1.1 mm; Dynamic load, C:26.7 kN; |
| komatsu 14X-54-39551 HOLDER | B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C; |
| komatsu 13Y-54-21942 HOLDER | C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; |
| komatsu 428-22-11240 HOLDER | da min:40 mm; da max:42 mm; Static load, C0:10.3 kN; B:14 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Max operating temperature, Tmax:110 °C; Da max:57 mm; ra max:1 mm; Fatigue limit load, Cu:0.47 kN; Mass:0.16 kg; |
| komatsu 561-22-11240 HOLDER | B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C; |
| komatsu 234-46-11161 HOLDER | Seals:VV (Non-Contact Rubb; Bearing Material:[Steel] Steel; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Part Number:6204; Volume Discount:Available; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Width T(mm):70; Type:Bearings with Housin; |
| komatsu 1-15330-044-2KF NOZZLE HOLDER | B:37.6 mm; A5:18.8 mm; Designation of housing:EHE207-; A2:40 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX207G2T20; T min.:-20 °C; G:R1/8"; H:90 mm; T max.:200 °C; |
| komatsu 46B-DRW-1191UKKF HOLDER | Type:Bearings with Housin; Flange O.D. H(φ):38; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Shape:Flanged Pilot Type; Bearing Part Number:605; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; |
| komatsu 795-502-1121 HOLDER | Seal:Silicone; Basic Load Rating, Dynamic Rating(N):34100; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Days to Ship:10 Days; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Pillow Type, Category:Centre Height; Fit:J7; Bearing Inner Dia. Shape:Cylindrical Bore Set; |