komatsu 8287-70-7320 HOLDER	Da max:65.5 mm; Mass:0.36 kg; Min operating temperature, Tmin:-30 °C; Brand:NTN; B:19 mm; Nlim (grease):6,600 rpm; ra max:1 mm; da min:36.5 mm; rs min:1.1 mm; Dynamic load, C:26.7 kN;
komatsu KD7-23750-0124 HOLDER	T max.:100 °C; Weight:0.54 kg; N:12mm; s1:15.5 mm; T min.:-20 °C; L:58.5 mm; J:90 mm; B:31 mm; C0:6.8 kN; A2:33.3 mm;
komatsu 8287-70-7320 HOLDER	C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;
komatsu 792-840-2050 HOLDER	C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;
komatsu KV-1B27-1160 HOLDER	T max.:100 °C; Weight:0.54 kg; N:12mm; s1:15.5 mm; T min.:-20 °C; L:58.5 mm; J:90 mm; B:31 mm; C0:6.8 kN; A2:33.3 mm;
komatsu 11Y-54-51941 HOLDER	Seals:VV (Non-Contact Rubb; Bearing Material:[Steel] Steel; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Part Number:6204; Volume Discount:Available; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Width T(mm):70; Type:Bearings with Housin;
komatsu 11Y-30-44150 HOLDER	T max.:100 °C; Weight:0.54 kg; N:12mm; s1:15.5 mm; T min.:-20 °C; L:58.5 mm; J:90 mm; B:31 mm; C0:6.8 kN; A2:33.3 mm;
komatsu 56B-23-16860 HOLDER	N:11,5mm; d:28.58 mm; s1:27.8 mm; J:117 mm; A:24 mm; A2:39.7 mm; S:9 mm; G:R1/8"; C:19.5 kN; B1:35.7 mm;
komatsu 14X-27-11633 HOLDER	C:66 kN; T max.:200 °C; A1:22 mm; A:56 mm; Designation of housing:F215-; S:37.3 mm; C0:49.5 kN; Weight:6.4 kg; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm;
komatsu HS2130-63022 BRUSH HOLDER AS	da min:40 mm; da max:42 mm; Static load, C0:10.3 kN; B:14 mm; Characteristic outer ring frequency, BPF0:4.6 Hz; Max operating temperature, Tmax:110 °C; Da max:57 mm; ra max:1 mm; Fatigue limit load, Cu:0.47 kN; Mass:0.16 kg;