komatsu 195-13-11251 PILOT | Weight:0.91 kg; Recommended tightening torque for set screw:3.7 Nm; G:M6x1; A2:40.2 mm; H:144 mm; L1:72 mm; S:15.9 mm; d:30.16 mm; B:38.1 mm; N:12mm; |
komatsu 23B-61-43101 PILOT | T max.:100 °C; Designation of housing:FE207N-; T min.:-40 °C; d:36.51 mm; Z:50.7 mm; e:21 mm; C:25.7 kN; s1:16 mm; N:14mm; S:8.5 mm; |
komatsu 23B-61-43101 PILOT | Weight:0.91 kg; Recommended tightening torque for set screw:3.7 Nm; G:M6x1; A2:40.2 mm; H:144 mm; L1:72 mm; S:15.9 mm; d:30.16 mm; B:38.1 mm; N:12mm; |
komatsu 144-13-11252 PILOT | Size Standards:Metric System; Outer Ring Shape:Flat; Rolling Element Material:[Steel] Steel; Internal Symbol:No; Basic Dynamic Load Rating(N):29100; Retainer Type:Punching; Material Symbol:No; Type:Ball; I.D.(Ø):40; |
komatsu 142-30-14171 PILOT | Height H(mm):50 ~ 80; RoHS:6; Type:Bearings with Housin; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Shape:Bottom Mount; Lateral Width L(mm):62; |
komatsu 120-X16-1450 PILOT | Days to Ship:8 Days; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Volume Discount:Available; RoHS:6; Flange O.D. H(φ):104; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; |
komatsu 795-100-4281 PILOT | Fatigue limit load, Cu:0.21 kN; Mass:0.04 kg; da min:27 mm; Characteristic cage frequency, FTF:0.43 Hz; Dynamic load, C:7.05 kN; Nlim (grease):16,000 rpm; Characteristic outer ring frequency, BPF0:5.58 Hz; Static load, C0:4.55 kN; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:7.42 Hz; |
komatsu 175-30-34150 PILOT | T max.:100 °C; Designation of housing:FE207N-; T min.:-40 °C; d:36.51 mm; Z:50.7 mm; e:21 mm; C:25.7 kN; s1:16 mm; N:14mm; S:8.5 mm; |
komatsu 23S-60-26303 PILOT | T max.:100 °C; Designation of housing:FE207N-; T min.:-40 °C; d:36.51 mm; Z:50.7 mm; e:21 mm; C:25.7 kN; s1:16 mm; N:14mm; S:8.5 mm; |
komatsu 711-59-11252 PILOT | Surface Treatment:Electroless Nickel P; Days to Ship:8 Days; Material:1045 Carbon Steel; L Selection(inch):1.5 ~ 2.5; O.D. D(φ):3/4; RoHS:6; |