Komatsu tool " | C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm; |
Komatsu tool " | Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm; |
Komatsu tool " | Bearing Retained:No; Number of Bearings:Double; Bearing Part Number:6702; Type:Bearings with Housin; Flange O.D. H(φ):44; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; |
Komatsu tool "CKSM-2944-63K The repair kit | rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm; |
Komatsu tool 792-135-4510 tool | rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm; |
Komatsu tool "707-99-58350 The repair kit | C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm; |
Komatsu tool " | e:0.27; da min:45.1 mm; Y2:3.68; D:80 mm; Dynamic load, C:116 kN; D1:73.8 mm; Static load, C0:105 kN; d2:47.8 mm; B:28 mm; Characteristic outer ring frequency, BPF0:6.64 Hz; |
Komatsu tool " | Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ~ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield); |
Komatsu tool 790-434-1800 tool Assembly | s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm; |
Komatsu tool " | Mass:1.34 kg; Brand:SNR; ra max:1.5 mm; Y0:1.86; Associated sleeve reference:H2309; Nref:5,300 rpm; Max operating temperature, Tmax:200 °C; Ce min:5 mm; k:3 mm; Characteristic rolling element frequency, BSF:4.85 Hz; |