Komatsu tool "	Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm;
Komatsu tool "	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool "	Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield);
Komatsu tool "195-15-05671 The repair kit	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "421-33-05011 The repair kit	A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm;
Komatsu tool "	Volume Discount:Available; Number of Bearings:Double; Bearing I.D. d(mm):15; Housing Material:1045 Carbon Steel; Shape:Flange Type; Flange O.D. H(φ):44; Bearing Part Number:6702; Holder Surface Treatment:Black Oxide Coating;
Komatsu tool "	Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm;
Komatsu tool "711-53-05040 The repair kit	e:0.27; da min:45.1 mm; Y2:3.68; D:80 mm; Dynamic load, C:116 kN; D1:73.8 mm; Static load, C0:105 kN; d2:47.8 mm; B:28 mm; Characteristic outer ring frequency, BPF0:6.64 Hz;
Komatsu tool "23B-23-05010 The repair kit	e:0.27; da min:45.1 mm; Y2:3.68; D:80 mm; Dynamic load, C:116 kN; D1:73.8 mm; Static load, C0:105 kN; d2:47.8 mm; B:28 mm; Characteristic outer ring frequency, BPF0:6.64 Hz;
Komatsu tool "	Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield);