Komatsu tool "195-63-05091 The repair kit	d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load;
Komatsu tool "234-15-05131 The repair kit	Mass:1.34 kg; Brand:SNR; ra max:1.5 mm; Y0:1.86; Associated sleeve reference:H2309; Nref:5,300 rpm; Max operating temperature, Tmax:200 °C; Ce min:5 mm; k:3 mm; Characteristic rolling element frequency, BSF:4.85 Hz;
Komatsu tool "	C0:7.88 kN; A2:38.7 mm; Weight:0.81 kg; B:34 mm; e:19 mm; A1:11 mm; C:14 kN; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FE205-; s1:17 mm;
Komatsu tool "566-35-05015 The repair kit	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool "561-15-05415 The repair kit	Volume Discount:Available; Number of Bearings:Double; Bearing I.D. d(mm):15; Housing Material:1045 Carbon Steel; Shape:Flange Type; Flange O.D. H(φ):44; Bearing Part Number:6702; Holder Surface Treatment:Black Oxide Coating;
Komatsu tool "	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "561-13-05021 The repair kit	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool 790-261-1281 tool	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;