| Komatsu tool " | C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm; |
| Komatsu tool " | Mass:1.34 kg; Brand:SNR; ra max:1.5 mm; Y0:1.86; Associated sleeve reference:H2309; Nref:5,300 rpm; Max operating temperature, Tmax:200 °C; Ce min:5 mm; k:3 mm; Characteristic rolling element frequency, BSF:4.85 Hz; |
| Komatsu tool " | Mass:1.34 kg; Brand:SNR; ra max:1.5 mm; Y0:1.86; Associated sleeve reference:H2309; Nref:5,300 rpm; Max operating temperature, Tmax:200 °C; Ce min:5 mm; k:3 mm; Characteristic rolling element frequency, BSF:4.85 Hz; |
| Komatsu tool "195-63-05110 The repair kit | rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm; |
| Komatsu tool "566-35-05015 The repair kit | d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; |
| Komatsu tool "707-98-24910 The repair kit | Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield); |
| Komatsu tool 79A-222-2020 tool | s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm; |
| Komatsu tool "232-62-05030 The repair kit | Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type; |
| Komatsu tool "707-98-25090 The repair kit | Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type; |
| Komatsu tool " | Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm; |