Komatsu tool "707-99-87710 The repair kit	d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load;
Komatsu tool "424-35-05112 The repair kit	Mass:1.34 kg; Brand:SNR; ra max:1.5 mm; Y0:1.86; Associated sleeve reference:H2309; Nref:5,300 rpm; Max operating temperature, Tmax:200 °C; Ce min:5 mm; k:3 mm; Characteristic rolling element frequency, BSF:4.85 Hz;
Komatsu tool "	Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield);
Komatsu tool "	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "	Mass:1.34 kg; Brand:SNR; ra max:1.5 mm; Y0:1.86; Associated sleeve reference:H2309; Nref:5,300 rpm; Max operating temperature, Tmax:200 °C; Ce min:5 mm; k:3 mm; Characteristic rolling element frequency, BSF:4.85 Hz;
Komatsu tool "195-15-05221 The repair kit	Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm;
Komatsu tool "	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool "707-99-47110 The repair kit	s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm;
Komatsu tool "567-27-05030 The repair kit	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;