Komatsu tool "	A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm;
Komatsu tool "23B-15-05113 The repair kit	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "	e:0.27; da min:45.1 mm; Y2:3.68; D:80 mm; Dynamic load, C:116 kN; D1:73.8 mm; Static load, C0:105 kN; d2:47.8 mm; B:28 mm; Characteristic outer ring frequency, BPF0:6.64 Hz;
Komatsu tool "195-63-05040 The repair kit	d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load;
Komatsu tool "	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "195-63-05130 The repair kit	A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm;
Komatsu tool "419-15-05100 The repair kit	Volume Discount:Available; Number of Bearings:Double; Bearing I.D. d(mm):15; Housing Material:1045 Carbon Steel; Shape:Flange Type; Flange O.D. H(φ):44; Bearing Part Number:6702; Holder Surface Treatment:Black Oxide Coating;
Komatsu tool "144-13-05200 The repair kit	A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm;
Komatsu tool "273-32-61360 The repair kit	Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm;
Komatsu tool "XA2268KE The repair kit	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;