| Komatsu tool "13E-15-05021 The repair kit | Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield); |
| Komatsu tool " | A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm; |
| Komatsu tool "144-15-05020 The repair kit | Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield); |
| Komatsu tool " | C0:7.88 kN; A2:38.7 mm; Weight:0.81 kg; B:34 mm; e:19 mm; A1:11 mm; C:14 kN; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FE205-; s1:17 mm; |
| Komatsu tool "144-15-05220 The repair kit | d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; |
| Komatsu tool "421-15-05117 The repair kit | C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm; |
| Komatsu tool "23B-15-05113 The repair kit | d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; |
| Komatsu tool 21D-43-11280 tool | rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm; |
| Komatsu tool "707-99-58050 The repair kit | rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm; |
| Komatsu tool " | Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type; |