| Komatsu tool " | d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; |
| Komatsu tool "23B-15-05113 The repair kit | d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; |
| Komatsu tool "707-98-34580 The repair kit | Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No; |
| Komatsu tool "707-99-43570 The repair kit | Bearing Retained:No; Number of Bearings:Double; Bearing Part Number:6702; Type:Bearings with Housin; Flange O.D. H(φ):44; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; |
| Komatsu tool "567-27-05030 The repair kit | Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No; |
| Komatsu tool " | e:0.27; da min:45.1 mm; Y2:3.68; D:80 mm; Dynamic load, C:116 kN; D1:73.8 mm; Static load, C0:105 kN; d2:47.8 mm; B:28 mm; Characteristic outer ring frequency, BPF0:6.64 Hz; |
| Komatsu tool 795-799-1500CS promote tool | C0:7.88 kN; A2:38.7 mm; Weight:0.81 kg; B:34 mm; e:19 mm; A1:11 mm; C:14 kN; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FE205-; s1:17 mm; |
| Komatsu tool "707-99-12410 The repair kit | Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No; |
| Komatsu tool " | Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type; |
| Komatsu tool " | s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm; |