Komatsu tool "	Bearing Retained:No; Number of Bearings:Double; Bearing Part Number:6702; Type:Bearings with Housin; Flange O.D. H(φ):44; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15;
Komatsu tool "	Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type;
Komatsu tool "	Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm;
Komatsu tool "	e:0.27; da min:45.1 mm; Y2:3.68; D:80 mm; Dynamic load, C:116 kN; D1:73.8 mm; Static load, C0:105 kN; d2:47.8 mm; B:28 mm; Characteristic outer ring frequency, BPF0:6.64 Hz;
Komatsu tool "707-99-58310 The repair kit	C0:7.88 kN; A2:38.7 mm; Weight:0.81 kg; B:34 mm; e:19 mm; A1:11 mm; C:14 kN; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FE205-; s1:17 mm;
Komatsu tool "	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "714-07-05020 The repair kit	Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield);
Komatsu tool "	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool "	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool "	C0:7.88 kN; A2:38.7 mm; Weight:0.81 kg; B:34 mm; e:19 mm; A1:11 mm; C:14 kN; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FE205-; s1:17 mm;