Komatsu tool "XA2268 The repair kit	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "	s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm;
Komatsu tool 209-98-77310 tool	A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm;
Komatsu tool "	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool 795-600-2531 tool	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "19M-15-05100 The repair kit	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool "207-98-K1000 toolComplete set of appliances	Mass:1.34 kg; Brand:SNR; ra max:1.5 mm; Y0:1.86; Associated sleeve reference:H2309; Nref:5,300 rpm; Max operating temperature, Tmax:200 °C; Ce min:5 mm; k:3 mm; Characteristic rolling element frequency, BSF:4.85 Hz;
Komatsu tool "	Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield);