Komatsu tool "	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;
Komatsu tool 792-103-4102 tool	Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm;
Komatsu tool "	A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm;
Komatsu tool "714-12-05063 The repair kit	d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load;
Komatsu tool 209-98-77310 tool	A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; H:161 mm; T max.:100 °C; N:16mm; Designation of bearing:UC207G2T04; G:M6x1; Z:48.7 mm; e:19 mm; L:90 mm;
Komatsu tool "707-98-52150 The repair kit	s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm;
Komatsu tool "	Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield);
Komatsu tool "14X-15-05031 The repair kit	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "562-15-05131 The repair kit	s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm;
Komatsu tool "3ED-63-05010KF The repair kit	Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield);