Komatsu tool "23S-15-05211 The repair kit	s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm;
Komatsu tool 791-830-1480 tool	C0:6.65 kN; Dz:54 mm; e:19 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; C:12.8 kN; G:R1/8"; A2:37.3 mm; A:29.5 mm; S:12.7 mm;
Komatsu tool "	Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type;
Komatsu tool "234-25-07011 The repair kit	Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type;
Komatsu tool "711-66-05110 The repair kit	Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm;
Komatsu tool "	e:0.27; da min:45.1 mm; Y2:3.68; D:80 mm; Dynamic load, C:116 kN; D1:73.8 mm; Static load, C0:105 kN; d2:47.8 mm; B:28 mm; Characteristic outer ring frequency, BPF0:6.64 Hz;
Komatsu tool "23A-23-05010 The repair kit	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "425-15-05411 The repair kit	Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No;
Komatsu tool "	s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm;
Komatsu tool "	rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm;