| Komatsu tool "175-63-05010 The repair kit | Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Part Number:6800; Bearing I.D. d(mm):10; Shape:Flange Type; |
| Komatsu tool " | d:75; Fit:J7; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):67400; Diameter series symbol:Used for Light load; |
| Komatsu tool "14X-15-05150 The repair kit | s1:24 mm; T min.:-20 °C; J:100 mm; A4:27 mm; A2:40 mm; L:135 mm; e:11 mm; S:19 mm; Designation of bearing:UC307-22G2; d:34.92 mm; |
| Komatsu tool "714-15-05011 The repair kit | C0:7.88 kN; A2:38.7 mm; Weight:0.81 kg; B:34 mm; e:19 mm; A1:11 mm; C:14 kN; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:FE205-; s1:17 mm; |
| Komatsu tool "273-32-61360 The repair kit | Designation of housing:PA204N-; S:12.7 mm; Z:17 mm; Weight:0.58 kg; T min.:-20 °C; d:17.46 mm; C:12.8 kN; T max.:200 °C; A1:22 mm; E:13 mm; |
| Komatsu tool "17M-15-05021 The repair kit | rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm; |
| Komatsu tool " | Other Features:Deep Groove | Double; Outside Diameter:2.283 Inch | 58 Mill; B:7 mm; Inch - Metric:Metric; Outer Race Width:0.276 Inch | 7 Milli; D:58 mm; Inventory:0.0; Mass:0.04 kg; Rolling Element:Ball Bearing; Snap Ring:No; |
| Komatsu tool "154-33-05020 The repair kit | Bearing Retained:No; Number of Bearings:Double; Bearing Part Number:6702; Type:Bearings with Housin; Flange O.D. H(φ):44; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; |
| Komatsu tool "566-35-05014 The repair kit | Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; T(mm):25 ～ 50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Block; Bearing Retained:No; Holder Surface Treatment:Black Oxide Coating; Seals:ZZ (Double Shield); |
| Komatsu tool 795-600-2531 tool | rs min:1.5 mm; Nref:7,300 rpm; Characteristic outer ring frequency, BPF0:6.01 Hz; ra max:1.5 mm; db min:63.5 mm; Db max:94.5 mm; Fatigue limit load, Cu:1.53 kN; Mass:0.63 kg; D2:94.2 mm; D1:83 mm; |