| Komatsu Caterpillar board "21T-60-12940 The diaphragm | Seals:ZZ (Double Shield); Width T(mm):25 ～ 35; Shape:Flange Type; Bearing I.D. d(mm):8; Number of Bearings:Double; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:608; |
| Komatsu Caterpillar board 42C-13-11520 TURBINE | S:10.9 mm; Designation of housing:FLZ210-; d:50 mm; B:43.5 mm; H3:105; A2:56.6 mm; A4:37 mm; A1:13 mm; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; |
| Komatsu Caterpillar board 711-56-31511 TURBINE | G:M6x1; H1:15 mm; T max.:100 °C; L1:25 mm; A1:25 mm; H2:70 mm; Designation of bearing:US205-14G2; L:75 mm; d:22.22 mm; Weight:0.58 kg; |
| Komatsu Caterpillar board " | Seals:ZZ (Double Shield); Width T(mm):25 ～ 35; Shape:Flange Type; Bearing I.D. d(mm):8; Number of Bearings:Double; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:608; |
| Komatsu Caterpillar board 711-60-21512 TURBINE | H2:102 mm; A5:30.9 mm; Designation of bearing:EX212-36G2T20; G:M6x1; S:30.9 mm; d:57.15 mm; L1:119 mm; N:35mm; C0:32.8 kN; Designation of housing:T212-; |
| Komatsu Caterpillar board 711-47-41521 turbine | Seals:None; Cam Follower Type:Eccentric; Category:Cam Followers; Material:52100 Bearing Steel; Unit:Metric Series; D:26; Tightening Method:Hex Socket on Head; |
| Komatsu Caterpillar board 711-64-11520 TURBINE | D:225; Specifications/Environment:Standard; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):222000; Combination of Angular Contact Ball Bearings:Back Combination; Bearing Style:Open Type; B:70; |
| Komatsu Caterpillar board 198-13-31520 TURBINE | D:225; Specifications/Environment:Standard; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):222000; Combination of Angular Contact Ball Bearings:Back Combination; Bearing Style:Open Type; B:70; |
| Komatsu Caterpillar board 198-13-31520 TURBINE | Brand:NTN; d:10 mm; Characteristic cage frequency, FTF:0.37 Hz; Da max:24 mm; Max operating temperature, Tmax:180 °C; Min operating temperature, Tmin:-40 °C; Nlim (grease):29,000 rpm; Fatigue limit load, Cu:0.09 kN; D:26 mm; f0:12.4; |
| Komatsu Caterpillar board 14X-13-51520 TURBINE | S:10.9 mm; Designation of housing:FLZ210-; d:50 mm; B:43.5 mm; H3:105; A2:56.6 mm; A4:37 mm; A1:13 mm; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; |