komatsu	Retainer Type:Resin Forming; Preload Mark:/GN; Type:Angular Contact Ball; Basic Dynamic Load Rating(N):69500; Precision:Grade 5; Days to Ship:Quote; Outer Ring Shape:Flat; Size Standards:Metric System; Inner/Outer Ring Material:Steel;
komatsu	Bearing ring (washer) AS mass:0.003 kg; S:1 mm; washer type:Aligning Washer; Inventory:0.0; width:1 mm; Dp:24 mm; inside diameter:10 mm; Product Group:B04144; Min operating temperature, Tmin:-20 °C; Dp1:10 mm;
komatsu	Bearing ring (washer) AS mass:0.003 kg; S:1 mm; washer type:Aligning Washer; Inventory:0.0; width:1 mm; Dp:24 mm; inside diameter:10 mm; Product Group:B04144; Min operating temperature, Tmin:-20 °C; Dp1:10 mm;
komatsu	Characteristic inner ring frequency, BPFI:13 Hz; D:28 mm; Lw:7.8 mm; Cr:9.75 kN; Mass:0.02 kg; Inner ring reference:IR17X22X18; Min operating temperature, Tmin:-20 °C; Nlim (grease):7,500 rpm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:11 Hz;
komatsu	Rolling Element Material:Bearing Steel; Grease Type:SH44M; Basic Load Rating, Dynamic Rating(N):29100; Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:With cast iron cover; Fit:J7; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Pillow Type, Category:Standard;
komatsu	L:70 mm; Designation of bearing:US204G2; T min.:-20 °C; J:49 mm; S:7 mm; G:M6x1; Weight:0.53 kg; Designation of housing:PG204N-; Recommended tightening torque for set screw:5.5 Nm; E:16 mm;
komatsu	N:14mm; B1:56.3 mm; H:180 mm; J:148.5 mm; A2:58.9 mm; A:37.5 mm; d:42.86 mm; T min.:-20 °C; C:31.85 kN; Recommended tightening torque for set screw:8 Nm;
komatsu	L:125 mm; d1:44.1 mm; S:18.2 mm; B:36.4 mm; A4:23 mm; Designation of bearing:EX206G2T04; N:12mm; A1:8 mm; C:19.5 kN; Weight:1.46 kg;
komatsu	Seals:VV (Non-Contact Rubb; Height H(mm):40 ～ 60; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] Alu; RoHS:6; Days to Ship:8 Days; Shape:L-Shaped; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Height Indication:Height Configurable;
komatsu	L:70 mm; Designation of bearing:US204G2; T min.:-20 °C; J:49 mm; S:7 mm; G:M6x1; Weight:0.53 kg; Designation of housing:PG204N-; Recommended tightening torque for set screw:5.5 Nm; E:16 mm;