| Komatsu A housing "17A-54-12711 A housing | Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; Width T(mm):35; Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; RoHS:6; |
| Komatsu A housing " | Stroke:No; Unit, Type:Insert Bearing Unit; RoHS:6; Diameter series symbol:Used for Light load; Grease Type:Standard Grease; Basic Load Rating, Static Rating(N):36200; Bearing Unit, Type:Take-Up Type; Fit:J7; Rolling Element Material:Bearing Steel; |
| Komatsu A housing " | H:167 mm; N1:32 mm; Designation of housing:T213N-; A2:44 mm; Designation of bearing:UC213G2T04; Dz:132 mm; T max.:100 °C; T min.:-40 °C; SW:6 mm; B:65.1 mm; |
| Komatsu A housing "104-54-41223 A housing | C:52.5 kN; N:23mm; T min.:-40 °C; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; J1:92 mm; s1:39 mm; H:250 mm; d1:82 mm; S:12 mm; |
| Komatsu A housing "20Y-54-26750 A housing | C0:68 kN; T max.:100 °C; SW:5.56 mm; d:69.85 mm; Recommended tightening torque for set screw:27.1 Nm; m:12 mm; G:7/16-20UNF; D:150 mm; T min.:-20 °C; C1:12.8 mm; |
| Komatsu A housing " | Bearing Part Number:6202; Volume Discount:Available; Flange Shape:Round Type; Housing Material:1045 Carbon Steel; Seals:DD (Contact Rubber S; Width T(mm):65; Flange O.D. H(φ):66; Bearing Retained:No; Bearing I.D. d(mm):15; |
| Komatsu A housing " | Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; Width T(mm):35; Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; RoHS:6; |
| Komatsu A housing "566-54-6A221 A housing | Stroke:No; Unit, Type:Insert Bearing Unit; RoHS:6; Diameter series symbol:Used for Light load; Grease Type:Standard Grease; Basic Load Rating, Static Rating(N):36200; Bearing Unit, Type:Take-Up Type; Fit:J7; Rolling Element Material:Bearing Steel; |
| Komatsu A housing "103-54-31351 A housing | Brand:NTN; Mass:0.37 kg; ra max:1 mm; D:110 mm; d:80 mm; Min operating temperature, Tmin:-20 °C; B:16 mm; Characteristic rolling element frequency, BSF:10.85 Hz; Fatigue limit load, Cu:1.09 kN; da min:85 mm; |
| Komatsu A housing " | Characteristic inner ring frequency, BPFI:12.25 Hz; Nlim (oil):15,300 rpm; ra max:1 mm; Da max:123 mm; Characteristic rolling element frequency, BSF:7.87 Hz; Characteristic outer ring frequency, BPF0:9.75 Hz; Dynamic load, C:58.5 kN; Characteristic cage frequency, FTF:0.44 Hz; D2:121.9 mm; a:36.2 mm; |