Komatsu supporting 565-33-13120 supporting	N:13mm; s1:15.5 mm; Designation of housing:P204N-; Z:45 mm; Recommended tightening torque for set screw:5.5 Nm; L1:42 mm; H1:15 mm; N1:19 mm; C0:6.65 kN; G:M6x1;
Komatsu supporting 427-871-1120 supporting	Designation of bearing:UC309-27G2T04; T max.:100 °C; G:M6x1; e:25 mm; N:25mm; C0:31.8 kN; s1:28.5 mm; T min.:-40 °C; Recommended tightening torque for set screw:16.8 Nm; J:177 mm;
Komatsu supporting 198-56-43110 supporting	D:80; Precision:Grade 0; d:40; Types:16**/6*** series; Bearing Style:Rubber Sealed; Rolling Element Material:Steel; Size Standards:Metric System; Retainer Type:Punching; Seal, Shield Symbols:LLU; Type:Ball;
Komatsu supporting 3EC-22-39160KF supporting	Days to Ship:8 Days; Roller Lining:None; Thread Size on Cam Follower (M)(mm):M6; Shaft:Provided; Category:Cam Followers; Cam Follower Type:Standard; Roller Type:Flat Type; h(mm):17 ～ 32;
Komatsu supporting 426-54-13112 supporting	Brand:NTN; B:37 mm; Min operating temperature, Tmin:-60 °C; Characteristic rolling element frequency, BSF:4.12 Hz; rs min:2.1 mm; Category:Single Row Ball Bear; Static load, C0:77 kN; Nlim (grease):4,300 rpm; Weight / LBS:6.66; Outer Race Width:1.457 Inch | 37 Mill;
Komatsu supporting 426-43-19211 supporting	C:9.55 kN; J1:40 mm; C0:4.78 kN; Weight:0.34 kg; s1:23 mm; A2:37.1 mm; T min.:-20 °C; d1:27.2 mm; T max.:100 °C; A1:12 mm;
Komatsu supporting 799-609-1080 supporting	Brand:NTN; B:37 mm; Min operating temperature, Tmin:-60 °C; Characteristic rolling element frequency, BSF:4.12 Hz; rs min:2.1 mm; Category:Single Row Ball Bear; Static load, C0:77 kN; Nlim (grease):4,300 rpm; Weight / LBS:6.66; Outer Race Width:1.457 Inch | 37 Mill;
Komatsu supporting 427-44-11111 supporting	N:13mm; s1:15.5 mm; Designation of housing:P204N-; Z:45 mm; Recommended tightening torque for set screw:5.5 Nm; L1:42 mm; H1:15 mm; N1:19 mm; C0:6.65 kN; G:M6x1;
Komatsu supporting 425-20-15003 supporting	B:34 mm; Designation of open end cover:SCO205-25; L:70 mm; N:M10; A:36 mm; s1:17 mm; G:R1/8"; C:14 kN; T min.:-20 °C; S:14.3 mm;
Komatsu supporting 426-06-13123 supporting	N:13mm; s1:15.5 mm; Designation of housing:P204N-; Z:45 mm; Recommended tightening torque for set screw:5.5 Nm; L1:42 mm; H1:15 mm; N1:19 mm; C0:6.65 kN; G:M6x1;