komatsu 3EG-72-11391KF COLLAR	Static load, C0:15.3 kN; rs min:1.1 mm; Characteristic inner ring frequency, BPFI:5.44 Hz; da min:41.5 mm; ra max:1 mm; Da max:65.5 mm; Characteristic outer ring frequency, BPF0:3.56 Hz; f0:13.8; Nlim (grease):9,800 rpm; Max operating temperature, Tmax:120 °C;
komatsu 707-71-34650 COLLAR	Number of Bearings:Single; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; RoHS:6; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):10; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Width T(mm):13;
komatsu 562-15-53410 COLLAR	L2:13 mm; Z:21.7 mm; A:37 mm; L:129 mm; N:22mm; A2:30 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; SW:3.97 mm; N2:37 mm;
komatsu 21N-30-34160 COLLAR	Stroke:No; Unit Body Material:Cast Iron; Fit:J7; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; Unit, Type:Insert Bearing Unit; Surface Treatment:No;
komatsu 707-71-35160 COLLAR	Max operating temperature, Tmax:110 °C; D:52 mm; rNs min:0.5 mm; D4 max:57.9 mm; Mass:0.13 kg; ra max:1 mm; f0:13.9; B:15 mm; da max:32 mm; Nlim (grease):8,900 rpm;
komatsu 707-71-35300 COLLAR	A1:27 mm; Recommended tightening torque for set screw:8 Nm; Designation of bearing:EX207-21G2T04; S:18.8 mm; C:25.7 kN; B:37.6 mm; L1:49 mm; L:163 mm; C0:15.2 kN; Designation of housing:PE207-;
komatsu 198-15-42161 COLLAR	L2:13 mm; Z:21.7 mm; A:37 mm; L:129 mm; N:22mm; A2:30 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; SW:3.97 mm; N2:37 mm;
komatsu 22B-46-43221 COLLAR	s1:13.5 mm; A5:19.5 mm; S:7.5 mm; Weight:1.56 kg; T max.:100 °C; C0:7.88 kN; C:14 kN; L1:225 mm; T min.:-20 °C; L:264 mm;
komatsu 42C-70-11713 COLLAR	Number of Bearings:Single; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; RoHS:6; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):10; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Width T(mm):13;
komatsu 21N-30-36161 COLLAR	A1:27 mm; Recommended tightening torque for set screw:8 Nm; Designation of bearing:EX207-21G2T04; S:18.8 mm; C:25.7 kN; B:37.6 mm; L1:49 mm; L:163 mm; C0:15.2 kN; Designation of housing:PE207-;