komatsu 428-13-11510 BLOCK ASS'Y	C0:15.6 kN; d:31.75 mm; C1:5.7 mm; T min.:-20 °C; r:1.5; G:5/16-24UNF; m:6.5 mm; B:42.9 mm; D:72 mm; SW:3.97 mm;
komatsu 14X-62-53551 BLOCK ASS'Y	C0:15.6 kN; d:31.75 mm; C1:5.7 mm; T min.:-20 °C; r:1.5; G:5/16-24UNF; m:6.5 mm; B:42.9 mm; D:72 mm; SW:3.97 mm;
komatsu 708-2J-04150 BLOCK ASS'Y	Housing Material:[Aluminum Alloy] 201; Bearing Retained:No; Number of Bearings:Double; Bearing Part Number:6903; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; Days to Ship:7 Days; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea;
komatsu 17A-13-21520 BLOCK ASS'Y	T max.:200 °C; S:9 mm; B:34 mm; T min.:-20 °C; A2:49 mm; A:39.5 mm; J:101.5 mm; Designation of bearing:US208-24G2T20; Designation of closed end cover:SCC208; e:24 mm;
komatsu 1244252H1 BLOCK ASS'Y	A1:12 mm; SW:3 mm; B:34 mm; Designation of bearing:EX201G2T04; A2:21 mm; N:19mm; Weight:0.97 kg; L2:10 mm; Designation of housing:T204N-; L1:61 mm;
komatsu 711-53-11510 BLOCK ASS'Y	B:65.1 mm; T min.:-20 °C; C0:60.5 kN; A:50 mm; C:93.86 kN; A5:32.6 mm; Weight:6.45 kg; S:32.5 mm; Designation of bearing:EX313-40G2L3; d1:97 mm;
komatsu 711-56-31510 BLOCK ASS'Y	Number of Bearings:Double; Width T(mm):30 ～ 70; Shape:Flange Type; Bearing Part Number:6002; Housing Material:1045 Carbon Steel; Flange Shape:Square Type; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Holder Surface Treatment:Black Oxide Coating;
komatsu YM129935-18010 BLOCK ASS'Y	Housing Material:[Aluminum Alloy] 201; Bearing Retained:No; Number of Bearings:Double; Bearing Part Number:6903; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; Days to Ship:7 Days; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea;
komatsu 22U-979-1740 BLOCK ASS'Y	B:101.6; Fit:J7; Surface Treatment:No; Pillow Type, Category:Standard; Bearing Unit, Type:Pillow Type; Grease Type:SH44M; Accessory:With cast iron cover; Seal:Silicone;
komatsu 711-67-11514 BLOCK ASS'Y	bearing material:Hardened Alloy Steel; Nlim (oil):11,000 rpm; finish/coating:Uncoated; Bore:1.181 Inch | 30 Mill; da max:40 mm; outside diameter:72 mm; Separable:Inner Ring - Both Si; overall width:19 mm; Da max:65.5 mm; Snap Ring:No;