| komatsu 426-926-3754 ROOF | Recommended tightening torque for set screw:16.8 Nm; L1:260 mm; C0:23.2 kN; SW:4.76 mm; Z:23.5 mm; T min.:-20 °C; L:320 mm; T max.:200 °C; G:R1/8"; S:19 mm; |
| komatsu 2A5-70-14190 ROOF | H2:93 mm; A1:27 mm; s1:21.45 mm; T min.:-20 °C; A:45 mm; G:R1/8"; Dz:80 mm; Designation of housing:PAE207N-; S:17.5 mm; L1:22.5 mm; |
| komatsu 205-70-74190 ROOF | H1:22 mm; d:55.56 mm; C:43.55 kN; S:27.7 mm; T max.:200 °C; B:55.4 mm; s1:48.4 mm; Designation of bearing:EX211-35G2T20; A:60 mm; T min.:-20 °C; |
| komatsu 42A-54-53223 ROOF | Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Number of Bearings:Double; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Flange O.D. H(φ):36; Seals:DD (Contact Rubber S; Bearing Part Number:605; Width T(mm):20 ～ 40; |
| komatsu 426-926-3754 ROOF | B:49.2 mm; S:19 mm; Weight:1.88 kg; H2:107 mm; C:31.85 kN; N:M12; Designation of bearing:UC209-26G2T04; A1:32 mm; G:R1/8"; L1:29 mm; |
| komatsu 8260-70-5852 ROOF | d:33.34 mm; L:90 mm; A1:16 mm; Weight:1.31 kg; Designation of housing:FA207-; Designation of bearing:UC207-21G2; A2:44.4 mm; T max.:100 °C; C0:15.2 kN; J:130 mm; |
| komatsu 2A5-53-12412 ROOF | Internal Special Features:No; Cage Material:Steel; da min:40 mm; Long Description:35MM Bore; 62MM Outs; f0:14.8; Characteristic outer ring frequency, BPF0:4.6 Hz; Brand:NTN; Weight / Kilogram:0.155; Weight / LBS:0.342; Snap Ring:No; |
| komatsu 56B-54-15112 ROOF | da min:50 mm; dynamic load capacity:21000 N; Bore:1.772 Inch | 45 Mill; maximum rpm (grease):9200 rpm; Da max:70 mm; Minimum Buy Quantity:N/A; Weight / LBS:0.54; f0:15.3; UNSPSC:31171504; |
| komatsu 14X-Y79-4621 ROOF | Internal Special Features:No; Cage Material:Steel; da min:40 mm; Long Description:35MM Bore; 62MM Outs; f0:14.8; Characteristic outer ring frequency, BPF0:4.6 Hz; Brand:NTN; Weight / Kilogram:0.155; Weight / LBS:0.342; Snap Ring:No; |
| komatsu 208-53-11710CQ ROOF | Inner/Outer Ring Material:Steel; Basic Dynamic Load Rating(N):13400; Rolling Element Material:Steel; Specifications/Environment:Standard; Max. Allowed rpm(rpm):8900; Size Standards:Metric System; d:50; Retainer Type:Punching; Grease symbol:/5K; |