komatsu ASCN602716 KIT	L:220 mm; B:77.8 mm; A2:44.5 mm; T max.:100 °C; Weight:5.43 kg; C0:49.5 kN; Designation of housing:FCE215-; N:18mm; H3:160; J:184 mm;
komatsu 3EB-14-00520KF KIT	A:33 mm; H:150 mm; S:11 mm; B1:43.7 mm; Recommended tightening torque for set screw:8 Nm; N:14mm; Designation of bearing:ES209-26G2T04; T min.:-40 °C; G:R1/8"; C:31.85 kN;
komatsu 23B-27-31500 KIT	Machining:No; Surface Treatment:No; Accessory:With steel plate cov; Unit, Type:Insert Bearing Unit; Days to Ship:8 Days; Fit:J7; Basic Load Rating, Dynamic Rating(N):25700; Diameter series symbol:Used for Light load; Stroke:No;
komatsu 58C-22-00110 SHIM KIT	Bearing Part Number:6004; Seals:ZZ (Double Shield); Shape:T-Shaped; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Volume Discount:Available; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea;
komatsu 19M-32-05010 SHOE BOLT KIT	da min:71 mm; B:53.98 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; rs min:2.1 mm; Max operating temperature, Tmax:110 °C; Mass:1.73 kg; Static load, C0:52 kN; Characteristic cage frequency, FTF:0.38 Hz; Fatigue limit load, Cu:2.36 kN; Nlim (grease):3,600 rpm;
komatsu 22M-979-0510 KIT	Machining:No; Surface Treatment:No; Accessory:With steel plate cov; Unit, Type:Insert Bearing Unit; Days to Ship:8 Days; Fit:J7; Basic Load Rating, Dynamic Rating(N):25700; Diameter series symbol:Used for Light load; Stroke:No;
komatsu PKU5LT1179 KIT	A:33 mm; H:150 mm; S:11 mm; B1:43.7 mm; Recommended tightening torque for set screw:8 Nm; N:14mm; Designation of bearing:ES209-26G2T04; T min.:-40 °C; G:R1/8"; C:31.85 kN;
komatsu 58B-22-00110 SHIM KIT	C0:40 kN; G:M6x1; L:224 mm; s1:57.6 mm; C:57.2 kN; N:41mm; H:167 mm; A1:26 mm; Designation of bearing:EX213G2T04; A:70 mm;
komatsu AS195378 KIT	T min.:-40 °C; Designation of closed end cover:SCC207; B:42.9 mm; Designation of housing:PAE207N-; C:25.7 kN; N:M10; Z:58.9 mm; S:17.5 mm; A:45 mm; d:34.92 mm;
komatsu KBB670B-00006KF 0 KIT	Designation of housing:SF204N-; N:12mm; L:86 mm; Designation of bearing:SUC203; Recommended tightening torque for set screw:3.9 Nm; A2:33.3 mm; J:64 mm; S:12.7 mm; C:10.1 kN; Designation of closed end cover:SCC204;