komatsu CU3042590 GASKET	Characteristic inner ring frequency, BPFI:4.39 Hz; D:35 mm; da max:20 mm; rs min:0.6 mm; Fatigue limit load, Cu:0.16 kN; da min:19 mm; Static load, C0:3.6 kN; Nlim (grease):19,000 rpm; Da max:31 mm; Brand:NTN;
komatsu 6746-11-1180 GASKET	H:124 mm; G:R1/8"; L:70 mm; Weight:0.61 kg; e:19 mm; C:14 kN; T min.:-20 °C; d:22.22 mm; B:27 mm; Designation of open end cover:SCOU205-14;
komatsu 561-03-61141 GASKET	ras max:0.3 mm; t:1.5 mm; da min:47 mm; F:50 mm; Precision class:P0; d:45 mm; B:40 mm; Mass:0.12 kg; Brand:NTN; rs min:0.3 mm;
komatsu UD11044NC001 GASKET	J:166 mm; Recommended tightening torque for set screw:33 Nm; A4:40 mm; A:58 mm; G:M6x1; H3:175; Designation of housing:FS313-; Weight:8.85 kg; d:65 mm; B:75 mm;
komatsu CU3084382 GASKET	Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Width T(mm):30 ～ 50; Bearing Part Number:628; Type:Bearings with Housin; Flange O.D. H(φ):50;
komatsu 6754-22-9130 GASKET	ras max:0.3 mm; t:1.5 mm; da min:47 mm; F:50 mm; Precision class:P0; d:45 mm; B:40 mm; Mass:0.12 kg; Brand:NTN; rs min:0.3 mm;
komatsu 426-03-22690 GASKET	Inventory:0.0; d:65 mm; Weight / Kilogram:0.977; Enclosure:1 Metal Shield; ra max:1.5 mm; Long Description:65MM Bore; 120MM Out; B:23 mm; Outer Race Width:0.906 Inch | 23 Mill; Outside Diameter:4.724 Inch | 120 Mil; Rolling Element:Ball Bearing;
komatsu 8295-72-2130 GASKET	A1:22 mm; S:12.7 mm; Designation of open end cover:SCO204-20; E:13 mm; Weight:0.63 kg; Designation of closed end cover:SCC204; T min.:-20 °C; A:40 mm; T max.:100 °C; J:52 mm;
komatsu 198-03-73130 GASKET	Characteristic rolling element frequency, BSF:4.68 Hz; Dynamic load, C:19.5 kN; Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:5.42 Hz; D:62 mm; Radial clearance class:C3; Mass:0.2 kg; da min:35 mm; Min operating temperature, Tmin:-25 °C; ra max:1 mm;
komatsu 198-03-62441 GASKET	T min.:-40 °C; H1:13 mm; C0:18.2 kN; E:20 mm; A1:28 mm; A:54 mm; Recommended tightening torque for set screw:8 Nm; S:19 mm; s1:24.6 mm; Designation of housing:PA208N-;