komatsu CU3938267KF GASKET	J:166 mm; Recommended tightening torque for set screw:33 Nm; A4:40 mm; A:58 mm; G:M6x1; H3:175; Designation of housing:FS313-; Weight:8.85 kg; d:65 mm; B:75 mm;
komatsu 238-22-21181 GASKET	ras max:0.3 mm; t:1.5 mm; da min:47 mm; F:50 mm; Precision class:P0; d:45 mm; B:40 mm; Mass:0.12 kg; Brand:NTN; rs min:0.3 mm;
komatsu 426-03-22690 GASKET	Inventory:0.0; d:65 mm; Weight / Kilogram:0.977; Enclosure:1 Metal Shield; ra max:1.5 mm; Long Description:65MM Bore; 120MM Out; B:23 mm; Outer Race Width:0.906 Inch | 23 Mill; Outside Diameter:4.724 Inch | 120 Mil; Rolling Element:Ball Bearing;
komatsu UD11044NC001 GASKET	H:124 mm; G:R1/8"; L:70 mm; Weight:0.61 kg; e:19 mm; C:14 kN; T min.:-20 °C; d:22.22 mm; B:27 mm; Designation of open end cover:SCOU205-14;
komatsu 8240-72-1510 GASKET	H:124 mm; G:R1/8"; L:70 mm; Weight:0.61 kg; e:19 mm; C:14 kN; T min.:-20 °C; d:22.22 mm; B:27 mm; Designation of open end cover:SCOU205-14;
komatsu YM729906-92630 GASKET	Bearing Used:Deep Groove Ball Bea; Bearing Part Number:698; Holder Surface Treatment:Black Oxide Coating; RoHS:6; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Volume Discount:Available; Bearing Retained:Yes (with retaining; Number of Bearings:Double;
komatsu 198-03-62441 GASKET	S:6.5 mm; Designation of bearing:ES202G2T20; C:9.55 kN; Designation of housing:FD203G-; A:15 mm; A2:30.5 mm; e:8.4 mm; Recommended tightening torque for set screw:5.5 Nm; C0:4.78 kN; T max.:200 °C;
komatsu 8240-72-1350 GASKET	Characteristic inner ring frequency, BPFI:4.39 Hz; D:35 mm; da max:20 mm; rs min:0.6 mm; Fatigue limit load, Cu:0.16 kN; da min:19 mm; Static load, C0:3.6 kN; Nlim (grease):19,000 rpm; Da max:31 mm; Brand:NTN;
komatsu 42C-Z89-8390 GASKET	T min.:-40 °C; H1:13 mm; C0:18.2 kN; E:20 mm; A1:28 mm; A:54 mm; Recommended tightening torque for set screw:8 Nm; S:19 mm; s1:24.6 mm; Designation of housing:PA208N-;
komatsu 238-22-21181 GASKET	Bearing Material:[Steel] Steel; Bearing Part Number:6005; Bearing Used:Deep Groove Ball Bea; Width T(mm):18; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Shape:Flange Type; Number of Bearings:Single; Flange Shape:Square Type; Bearing I.D. d(mm):25;