Komatsu Shield 21M-03-15130 Shield	A4:42 mm; C:81.6 kN; B:61.9 mm; L:195 mm; e:19 mm; J:150 mm; Designation of housing:FS312-; s1:54.85 mm; Designation of bearing:EX312-39G2; S:31 mm;
Komatsu Shield 20Y-03-K1190 Shield	Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Thick Wall; Surface Treatment:No; Grease Type:Standard Grease; Stroke:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel;
Komatsu Shield 145-03-51410 Shield	L:171 mm; L1:106 mm; T max.:200 °C; N2:64 mm; L3:95 mm; SW:4.76 mm; H2:102 mm; A:64 mm; C0:29.2 kN; Weight:4.38 kg;
Komatsu Shield 175-03-31690 Shield	O.D.(Ø):110; Retainer Type:Momi removing; Outer Ring:With Outer Ring; Size Standards:Metric System; Combination symbol:No; Outer Ring Shape:Flat; Load Direction:Radial; RoHS:6; Max. Allowed rpm(rpm):5000;
Komatsu Shield 427-03-11221 Shield	Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Width T(mm):12; Volume Discount:Available; Flange O.D. H(φ):60; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type;
Komatsu Shield 20D-03-41472 Shield	H1:14.5 mm; Z:18.9 mm; A1:27.5 mm; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; H2:79.5 mm; C0:11.2 kN; S:15.9 mm; H:39.7 mm;
Komatsu Shield 145-03-51410 Shield	Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Thick Wall; Surface Treatment:No; Grease Type:Standard Grease; Stroke:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel;
Komatsu Shield 419-03-21340 Shield	Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Width T(mm):12; Volume Discount:Available; Flange O.D. H(φ):60; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type;
Komatsu Shield 418-03-21581 Shield	H1:14.5 mm; Z:18.9 mm; A1:27.5 mm; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; H2:79.5 mm; C0:11.2 kN; S:15.9 mm; H:39.7 mm;
Komatsu Shield 419-03-11140 Shield	H1:14.5 mm; Z:18.9 mm; A1:27.5 mm; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; H2:79.5 mm; C0:11.2 kN; S:15.9 mm; H:39.7 mm;