| Komatsu Shield X212203220ST Shield | H1:14.5 mm; Z:18.9 mm; A1:27.5 mm; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; s1:19.05 mm; H2:79.5 mm; C0:11.2 kN; S:15.9 mm; H:39.7 mm; |
| Komatsu Shield 262-97-73290 Shield | SW:5.56 mm; d1:102 mm; G:M10x1; s1:64.35 mm; A:52 mm; B1:92.1 mm; A5:34.1 mm; A3:4 mm; T max.:200 °C; Designation of bearing:EX314-44G2T20; |
| Komatsu Shield TW533130-7501 Shield | C0:20.8 kN; Designation of housing:F209-; G:M6x1; T min.:-40 °C; J:105 mm; S:10.2 mm; L:137 mm; A:38 mm; d:44.45 mm; N:16mm; |
| Komatsu Shield 418-03-21521 Shield | Lw:26.8 mm; Characteristic outer ring frequency, BPF0:5.36 Hz; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.41 Hz; Max operating temperature, Tmax:120 °C; b:31.5 mm; Cr:83.5 kN; Characteristic rolling element frequency, BSF:5.53 Hz; Ew:57 mm; Bc:31.5 mm; |
| Komatsu Shield 566-03-6A162 Shield | Accessory:With cast iron cover; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Thick Wall; Surface Treatment:No; Grease Type:Standard Grease; Stroke:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; |
| Komatsu Shield 203-954-6130CQ Shield | d1:74.5 mm; H:219 mm; L:130 mm; C0:29.2 kN; A2:61.4 mm; J1:86 mm; Weight:2.81 kg; J:184 mm; B:32.5 mm; B1:48.4 mm; |
| Komatsu Shield X221226830KZ Shield | d1:74.5 mm; H:219 mm; L:130 mm; C0:29.2 kN; A2:61.4 mm; J1:86 mm; Weight:2.81 kg; J:184 mm; B:32.5 mm; B1:48.4 mm; |
| Komatsu Shield 423-03-31220 Shield | Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Width T(mm):12; Volume Discount:Available; Flange O.D. H(φ):60; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; |
| Komatsu Shield 427-03-11221 Shield | Housing Material:[Aluminum Alloy] 201; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Width T(mm):12; Volume Discount:Available; Flange O.D. H(φ):60; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; |
| Komatsu Shield 175-03-31690 Shield | O.D.(Ø):110; Retainer Type:Momi removing; Outer Ring:With Outer Ring; Size Standards:Metric System; Combination symbol:No; Outer Ring Shape:Flat; Load Direction:Radial; RoHS:6; Max. Allowed rpm(rpm):5000; |