| Komatsu Propeller " | T max.:100 °C; C:9.55 kN; A:20 mm; Weight:0.43 kg; Recommended tightening torque for set screw:3.7 Nm; d1:27.2 mm; G:M6x1; C0:4.78 kN; A2:32.1 mm; d:17.46 mm; |
| Komatsu Propeller 22K-46-18250 weight | L1:17.5 mm; d:15 mm; A:30 mm; T min.:-40 °C; Designation of bearing:US202G2T04; H2:57 mm; s1:11 mm; Recommended tightening torque for set screw:3.5 Nm; B:22 mm; G:M6x1; |
| Komatsu Propeller "203-03-41580 (oil / water) | A1:16 mm; B:53.7 mm; G:R1/8"; S:14.9 mm; Designation of bearing:US212-36G2; e:30 mm; s1:26.85 mm; Recommended tightening torque for set screw:16.8 Nm; A4:45 mm; H:238 mm; |
| Komatsu Propeller " | C0:11.2 kN; H:42.9 mm; L:98 mm; N:M10; Weight:0.87 kg; J:76.2 mm; A1:25 mm; Recommended tightening torque for set screw:5.5 Nm; A:38 mm; Z:18.5 mm; |
| Komatsu Propeller 796-970-1150 Propeller | Nlim (grease):8,400 rpm; Static load, C0:16.6 kN; Radial clearance class:CN; D:80 mm; Dynamic load, C:21.8 kN; Characteristic inner ring frequency, BPFI:7.94 Hz; rs min:1 mm; da min:55 mm; Brand:NTN; f0:15.5; |
| Komatsu Propeller " | Volume Discount:Available; Type:Bearings with Housin; Number of Bearings:Single; Bearing Material:[Steel] Steel; Housing Material:304 Stainless Steel; RoHS:6; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Bearing Retained:No; |
| Komatsu Propeller " | A3:2.5 mm; S:15 mm; Recommended tightening torque for set screw:3.7 Nm; A:26 mm; C:22.36 kN; SW:3.18 mm; Designation of bearing:UC305-15G2L3; T min.:-20 °C; H:90 mm; T max.:100 °C; |
| Komatsu Propeller 22K-46-18250 weight | C0:11.2 kN; H:42.9 mm; L:98 mm; N:M10; Weight:0.87 kg; J:76.2 mm; A1:25 mm; Recommended tightening torque for set screw:5.5 Nm; A:38 mm; Z:18.5 mm; |
| Komatsu Propeller 423-974-2111 weight | Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Width T(mm):26; Flange Shape:Round Type; Shape:Flange Type; Flange O.D. H(φ):66; Holder Surface Treatment:Not Provided; Number of Bearings:Double; Bearing I.D. d(mm):17; |
| Komatsu Propeller "235-60-32110 (oil / water) | T max.:100 °C; C:9.55 kN; A:20 mm; Weight:0.43 kg; Recommended tightening torque for set screw:3.7 Nm; d1:27.2 mm; G:M6x1; C0:4.78 kN; A2:32.1 mm; d:17.46 mm; |