komatsu 425-W11-1111 RIM	Rating life coefficient, A2:1.9; ra max:0.8 mm; Y2:1.1; a:23.57 mm; Max operating temperature, Tmax:120 °C; Mass:0.69 kg; Characteristic rolling element frequency, BSF:6.92 Hz; r1a max:3.3 mm; d:31.75 mm; e:0.55;
komatsu 424-30-32111 RIM	L:264 mm; C0:6.65 kN; d1:32.4 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of open end cover:SCOE204-15; B1:43.5 mm; L1:225 mm; A:21 mm; T min.:-20 °C; SW:3 mm;
komatsu 3BA-27-43160KF RIM	Stroke:No; Diameter series symbol:For Heavy Load; Grease Type:Standard Grease; Days to Ship:Quote; Basic Load Rating, Dynamic Rating(N):184000; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):153000;
komatsu 56D-30-51410 RIM	Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Number of Bearings:Double; Days to Ship:7 Days; Type:Bearings with Housin; Bearing Part Number:6804; Flange Shape:Compact Type; Shape:Flanged Pilot Type; RoHS:6;
komatsu YM172527-68620 TRIM	Rating life coefficient, A2:1.9; ra max:0.8 mm; Y2:1.1; a:23.57 mm; Max operating temperature, Tmax:120 °C; Mass:0.69 kg; Characteristic rolling element frequency, BSF:6.92 Hz; r1a max:3.3 mm; d:31.75 mm; e:0.55;
komatsu 417-30-41111 RIM	Oil Holes:2.5 mm; Radius:2 mm; da:267 mm; Static Load Rating:206.4 kN; D:310 mm; d:250 mm; Da:289 mm; B:25 mm; Dynamic Load Rating:91.6 kN;
komatsu 421-W10-3211 RIM	L:120 mm; Designation of housing:PAE209N-; s1:24.6 mm; d:45 mm; G:R1/8"; T max.:200 °C; Designation of open end cover:SCO209-45; C:31.85 kN; J:95.3 mm; L1:29 mm;
komatsu 417-W49-4111 RIM	Holder Symbol:No; Rolling Element Material:[Steel] Steel; Acoustic Symbol:No; Outer Ring:With Outer Ring; I.D.(Ø):40; Days to Ship:6 Days or more; Retainer Type:Punching; Rubugado Symbol:No; Combination symbol:No; Torque Symbol:No;
komatsu 3FD-27-24211KF RIM	Oil Holes:2.5 mm; Radius:2 mm; da:267 mm; Static Load Rating:206.4 kN; D:310 mm; d:250 mm; Da:289 mm; B:25 mm; Dynamic Load Rating:91.6 kN;
komatsu 417-30-41121 RIM	Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; A2:27.5 mm; e:9.5 mm; Designation of bearing:US204G2; C:12.8 kN; S:7 mm; s1:12.5 mm; G:M6x1; H:90.5 mm;