| komatsu 417-U77-5930 FORK | Roller Type:Flat Type; Category:Cam Followers; Roller Guiding Method:Retainer Type; Shaft:Provided; Tightening Method:Standard Type; Roller Lining:None; Allowable Rotational Speed(rpm):29000; Cam Follower Type:Standard; D:13; |
| komatsu 416-884-1120 FORK | s1:21.45 mm; N:22mm; A5:25.4 mm; SW:3.97 mm; N1:16 mm; Designation of bearing:UC207-21G2L3; H1:89 mm; A1:12 mm; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; |
| komatsu 37B-7C1-3060KF FORK 1 | C:19.5 kN; A1:12 mm; J:82.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; T min.:-20 °C; S:15.9 mm; B:38.1 mm; N:11,5mm; s1:19.05 mm; |
| komatsu 418-884-1120 FORK | C:19.5 kN; A1:12 mm; J:82.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; T min.:-20 °C; S:15.9 mm; B:38.1 mm; N:11,5mm; s1:19.05 mm; |
| komatsu 102-14-52230 FORK | Brand:NTN; da min:68 mm; Characteristic cage frequency, FTF:0.41 Hz; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:1.64 kN; f0:14.3; Nlim (grease):3,800 rpm; Characteristic rolling element frequency, BSF:5.26 Hz; d:60 mm; Da max:102 mm; |
| komatsu 14X-14-12840 FORK | Characteristic cage frequency, FTF:0.41 Hz; B:20 mm; da min:56.5 mm; Characteristic rolling element frequency, BSF:5.33 Hz; Da max:83.5 mm; Brand:NTN; Nlim (grease):4,700 rpm; d:50 mm; Static load, C0:23.2 kN; D:90 mm; |
| komatsu 565-14-27211 FORK | C:19.5 kN; A1:12 mm; J:82.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; T min.:-20 °C; S:15.9 mm; B:38.1 mm; N:11,5mm; s1:19.05 mm; |
| komatsu 102-14-52210 FORK | L Selection(inch):0.75 ～ 1.25; O.D. D(φ):1/4; Days to Ship:8 Days; Surface Treatment:Electroless Nickel P; RoHS:6; Material:1045 Carbon Steel; |
| komatsu 421-880-1120 FORK | H:36.5 mm; G:R1/8"; S:14.3 mm; C0:7.88 kN; A:36 mm; H1:14.5 mm; C:14 kN; Dz:60 mm; L:130 mm; Z:47.3 mm; |
| komatsu 565-14-27211 FORK | Brand:NTN; da min:68 mm; Characteristic cage frequency, FTF:0.41 Hz; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:1.64 kN; f0:14.3; Nlim (grease):3,800 rpm; Characteristic rolling element frequency, BSF:5.26 Hz; d:60 mm; Da max:102 mm; |