| komatsu 416-897-1110 FORK | N:19mm; Designation of bearing:UC212-38G2T20; Z:42.7 mm; J:160 mm; C:52.5 kN; A4:36 mm; Weight:4.93 kg; G:M6x1; d:60.32 mm; Designation of housing:FC212N-; |
| komatsu 14X-14-12840 FORK | s1:21.45 mm; N:22mm; A5:25.4 mm; SW:3.97 mm; N1:16 mm; Designation of bearing:UC207-21G2L3; H1:89 mm; A1:12 mm; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; |
| komatsu 14X-14-12840 FORK | H:36.5 mm; G:R1/8"; S:14.3 mm; C0:7.88 kN; A:36 mm; H1:14.5 mm; C:14 kN; Dz:60 mm; L:130 mm; Z:47.3 mm; |
| komatsu 144-947-1521 FORK | H:36.5 mm; G:R1/8"; S:14.3 mm; C0:7.88 kN; A:36 mm; H1:14.5 mm; C:14 kN; Dz:60 mm; L:130 mm; Z:47.3 mm; |
| komatsu 565-14-27211 FORK | Brand:NTN; da min:68 mm; Characteristic cage frequency, FTF:0.41 Hz; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:1.64 kN; f0:14.3; Nlim (grease):3,800 rpm; Characteristic rolling element frequency, BSF:5.26 Hz; d:60 mm; Da max:102 mm; |
| komatsu 37B-7C1-3070KF FORK 2 | RoHS:6; Flange Shape:Square Type; Bearing Part Number:628; Shape:Flange Type; Flange O.D. H(φ):47; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Seals:DD (Contact Rubber S; Width T(mm):13; |
| komatsu 114-Z60-2710 FORK | Bearing Part Number:6006; Bearing I.D. d(mm):30; Number of Bearings:Single; Volume Discount:Available; Flange Shape:Round Type; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing Material:[Steel] Steel; |
| komatsu 37B-7B1-3050KF FORK 1 | Characteristic cage frequency, FTF:0.41 Hz; B:20 mm; da min:56.5 mm; Characteristic rolling element frequency, BSF:5.33 Hz; Da max:83.5 mm; Brand:NTN; Nlim (grease):4,700 rpm; d:50 mm; Static load, C0:23.2 kN; D:90 mm; |
| komatsu 134-960-1811 FORK | N:19mm; Designation of bearing:UC212-38G2T20; Z:42.7 mm; J:160 mm; C:52.5 kN; A4:36 mm; Weight:4.93 kg; G:M6x1; d:60.32 mm; Designation of housing:FC212N-; |
| komatsu 37B-7C1-3020KF FORK | Min operating temperature, Tmin:-40 °C; Mass:4.3 kg; da min:111 mm; Y1:2.39; Number of lubrication holes:3; e:0.28; Da max:154 mm; Characteristic outer ring frequency, BPF0:9.16 Hz; Characteristic rolling element frequency, BSF:7.57 Hz; Characteristic cage frequency, FTF:0.44 Hz; |