| komatsu 569-13-76850 SPOOL | H2:64 mm; Designation of bearing:EX201-08G2T20; s1:30.5 mm; d:12.7 mm; A:38 mm; C:12.8 kN; C0:6.65 kN; d1:32.4 mm; N:M8; S:17 mm; |
| komatsu 361-15-15321 SPOOL | Shaft:Provided; Roller Guiding Method:Retainer Type; Allowable Rotational Speed(rpm):5950; Roller Lining:None; Roller Type:Crowned Type; Material:52100 Bearing Steel; Unit:Metric Series; Basic Load Rating Cor (Static)(kN):25.2; |
| komatsu 195-15-15231 SPOOL | da min:51.5 mm; Enclosure Type:Non-Contact Seal; UNSPSC:31171504; Fatigue limit load, Cu:0.93 kN; Characteristic inner ring frequency, BPFI:5.38 Hz; Minimum Buy Quantity:N/A; d:45 mm; Snap Ring:No; Long Description:45MM Bore; 85MM Outs; |
| komatsu 363-64-33220 SPOOL ASS'Y | Basic Load Rating, Static Rating(N):11300; Machining:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Square flange shape; Surface Treatment:No; Temperature Properties:Standard; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Tapered hole adapter; Lubrication method:Oil-Free Type; Accessory:No Cover; |
| komatsu 700-91-12340 SPOOL | L1:25 mm; B:34 mm; s1:17 mm; L:75 mm; A1:25 mm; S:14.3 mm; Designation of bearing:UC205-16G2L3; d:25.4 mm; G:M6x1; Z:17.5 mm; |
| komatsu 702-21-39220 SPOOL | Nlim (oil):10,000 rpm; B:18 mm; Long Description:40MM Bore; Straight; da min:46.5 mm; d:40 mm; Category:Cylindrical Roller B; Characteristic inner ring frequency, BPFI:8.27 Hz; EAN:4547359138542; Rolling Element:Cylindrical Roller B; rs min:1.1 mm; |
| komatsu 723-50-00250 SPOOL | L1:25 mm; B:34 mm; s1:17 mm; L:75 mm; A1:25 mm; S:14.3 mm; Designation of bearing:UC205-16G2L3; d:25.4 mm; G:M6x1; Z:17.5 mm; |
| komatsu 561-15-74611 SPOOL | N:M16; B1:71.3 mm; L:150 mm; A:60 mm; H1:16 mm; Weight:3.43 kg; G:R1/8"; T min.:-20 °C; Recommended tightening torque for set screw:22 Nm; Designation of open end cover:SCOE211-55; |
| komatsu 14X-960-5120 SPOOL | Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:With steel plate cov; Seal:Silicone; Machining:No; Bearing Unit, Type:Square flange shape; Unit Body Material:Cast Iron; Fit:J7; Unit, Type:Insert Bearing Unit; |
| komatsu 155-15-15321 SPOOL | Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; Flange Shape:Compact Type; Volume Discount:Available; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Bearing Retained:No; |