komatsu 6152-81-8540 TUBO0	Mass:0.29 kg; Fatigue limit load, Cu:6 kN; Brand:NTN; ra max:0.8 mm; Max operating temperature, Tmax:120 °C; r1a max:1.5 mm; T:22.22 mm; Characteristic cage frequency, FTF:0.4 Hz; B:22.22 mm; Characteristic rolling element frequency, BSF:4.81 Hz;
komatsu 22B-54-18212 TUBO0	b min:1.9 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; Mass:0.45 kg; f:1.65 mm; Fatigue limit load, Cu:1.13 kN; Snap ring reference:R80; Min operating temperature, Tmin:-40 °C; Da max:72 mm; B:21 mm; da max:46.2 mm;
komatsu 3EB-24-42241SGKF TUBO0	Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Holder Surface Treatment:Electroless Nickel P; Number of Bearings:Double; Width T(mm):60 ～ 70; Housing Material:1045 Carbon Steel; Bearing Part Number:6008; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin;
komatsu 3EA-24-42241SGKF TUBO0	Type:Bearings with Housin; RoHS:6; Number of Bearings:Double; Bearing Retained:No; T(mm):25 ～ 35; Holder Surface Treatment:Clear Anodize; Height Indication:Height Selection; Shape:T-Shaped; Seals:ZZ (Double Shield);
komatsu 3EB-24-31240SGKF TUBO0	J:95.3 mm; E:15 mm; A:48 mm; C:31.85 kN; L:120 mm; S:21.4 mm; d1:62 mm; H2:107 mm; G:R1/8"; C0:20.8 kN;
komatsu 6152-81-8350 TUBO0	Designation of housing:FCE205-; A:20 mm; B:21.4 mm; J:90 mm; C0:7.88 kN; C:14 kN; Weight:0.78 kg; B1:30.9 mm; S:7.5 mm; A2:25.9 mm;
komatsu 415-70-21950 TUBO0	d:61.91 mm; L:140 mm; A2:67.8 mm; T max.:100 °C; C:52.5 kN; Designation of open end cover:SCOU212-39; B:53.7 mm; Designation of housing:FL212N-; Designation of bearing:US212-39G2T04; e:29 mm;
komatsu 3EB-34-32112UNKF TUBO0	Fatigue limit load, Cu:0.31 kN; Da max:45 mm; D:50 mm; B:14 mm; f0:13.5; Max operating temperature, Tmax:120 °C; Dynamic load, C:12.8 kN; D1:41.2 mm; rs min:1 mm; d1:30.8 mm;
komatsu 6156-81-8130 TUBO0	d:61.91 mm; L:140 mm; A2:67.8 mm; T max.:100 °C; C:52.5 kN; Designation of open end cover:SCOU212-39; B:53.7 mm; Designation of housing:FL212N-; Designation of bearing:US212-39G2T04; e:29 mm;
komatsu 417-40-22110 TUBO0	T min.:-20 °C; H:42.9 mm; Designation of closed end cover:SCC206; J:76.2 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; H1:11 mm; S:8 mm; L1:22 mm; N:M10;