| komatsu 416-S30-2230 TUBO0 | J:95.3 mm; E:15 mm; A:48 mm; C:31.85 kN; L:120 mm; S:21.4 mm; d1:62 mm; H2:107 mm; G:R1/8"; C0:20.8 kN; |
| komatsu 56D-23-11300 TUBO0 | Max operating temperature, Tmax:120 °C; Mass:0.07 kg; D:42 mm; ra max:0.6 mm; Nlim:29,000 rpm; Dynamic load, C:9.3 kN; B:12 mm; Characteristic rolling element frequency, BSF:4.68 Hz; Nref:18,000 rpm; Fatigue limit load, Cu:0.23 kN; |
| komatsu 417-70-21140 TUBO0 | T min.:-20 °C; H:42.9 mm; Designation of closed end cover:SCC206; J:76.2 mm; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; H1:11 mm; S:8 mm; L1:22 mm; N:M10; |
| komatsu 569-86-85150 TUBO0 | Max operating temperature, Tmax:120 °C; Mass:0.07 kg; D:42 mm; ra max:0.6 mm; Nlim:29,000 rpm; Dynamic load, C:9.3 kN; B:12 mm; Characteristic rolling element frequency, BSF:4.68 Hz; Nref:18,000 rpm; Fatigue limit load, Cu:0.23 kN; |
| komatsu 561-86-61210 TUBO0 | Unit, Type:Insert Bearing Unit; d:130; Bearing Inner Dia. Shape:Cylindrical Bore Set; Stroke:No; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Seal:Silicone; Fit:J7; Pillow Type, Category:Thick Wall; |
| komatsu 561-86-61210 TUBO0 | Designation of housing:FCE205-; A:20 mm; B:21.4 mm; J:90 mm; C0:7.88 kN; C:14 kN; Weight:0.78 kg; B1:30.9 mm; S:7.5 mm; A2:25.9 mm; |
| komatsu 3EA-24-42241SGKF TUBO0 | Type:Bearings with Housin; RoHS:6; Number of Bearings:Double; Bearing Retained:No; T(mm):25 ～ 35; Holder Surface Treatment:Clear Anodize; Height Indication:Height Selection; Shape:T-Shaped; Seals:ZZ (Double Shield); |
| komatsu 421-30-14101 TUBO0 | Designation of housing:FCE205-; A:20 mm; B:21.4 mm; J:90 mm; C0:7.88 kN; C:14 kN; Weight:0.78 kg; B1:30.9 mm; S:7.5 mm; A2:25.9 mm; |
| komatsu 418-T80-2210 TUBO0 | d:61.91 mm; L:140 mm; A2:67.8 mm; T max.:100 °C; C:52.5 kN; Designation of open end cover:SCOU212-39; B:53.7 mm; Designation of housing:FL212N-; Designation of bearing:US212-39G2T04; e:29 mm; |
| komatsu 3EA-24-32312SGKF TUBO0 | Type:Bearings with Housin; RoHS:6; Number of Bearings:Double; Bearing Retained:No; T(mm):25 ～ 35; Holder Surface Treatment:Clear Anodize; Height Indication:Height Selection; Shape:T-Shaped; Seals:ZZ (Double Shield); |