Komatsu bushing 07435-66161 bushing	A1:10 mm; Designation of bearing:EX201-08G2T04; B1:43.5 mm; C:12.8 kN; d1:32.4 mm; B:34 mm; A:29.5 mm; L:86 mm; N:11,5mm; T max.:100 °C;
Komatsu bushing 19M-31-11121 bushing	Weight / Kilogram:0; Dynamic load, C:4.55 kN; Internal Clearance:C3-Loose; Manufacturer Name:NTN; Minimum Buy Quantity:N/A; Static load, C0:1.96 kN; UNSPSC:31171504; D:26 mm; Inner Race Width:0 Inch | 0 Millimete;
Komatsu bushing 22W-15-22390 bushing	Designation of housing:C204-; SW:3 mm; B:31 mm; T max.:100 °C; G:M6x1; s1:15.5 mm; Weight:0.51 kg; A:20 mm; A3:1.5 mm; H:72 mm;
Komatsu bushing 07429-66065 bushing	G:M6x1; C:9.55 kN; e:15 mm; B1:28.6 mm; Designation of housing:FA203-; A:25.5 mm; A1:12 mm; J:78 mm; N:10mm; L1:54 mm;
Komatsu bushing "	da max:59.7 mm; Characteristic rolling element frequency, BSF:7.37 Hz; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:7.93 Hz; Brand:SNR; Db min:88 mm; da min:55 mm; Characteristic cage frequency, FTF:0.43 Hz; D4 max:86.6 mm; f0:15.6;
Komatsu bushing 20X-70-22120 bushing	C0:11.2 kN; Designation of bearing:UC206-20G2L3; Weight:1.99 kg; A5:22.2 mm; H:98 mm; d:31.75 mm; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; C:19.5 kN; T min.:-20 °C;
Komatsu bushing 06000070GSK end pin bushing	Fit:J7; Surface Treatment:No; Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):34100; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Stroke:No;
Komatsu bushing 234-27-31880 bushing	Volume Discount:Available; Shape:Flange Type; Number of Bearings:Double; Width T(mm):70; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No;
Komatsu bushing 205-945-7150 bushing	Designation of housing:C204-; SW:3 mm; B:31 mm; T max.:100 °C; G:M6x1; s1:15.5 mm; Weight:0.51 kg; A:20 mm; A3:1.5 mm; H:72 mm;
Komatsu bushing 235-70-45220 bushing	C0:11.2 kN; Designation of bearing:UC206-20G2L3; Weight:1.99 kg; A5:22.2 mm; H:98 mm; d:31.75 mm; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; C:19.5 kN; T min.:-20 °C;