komatsu X210845870ST IDLER	C:12.8 kN; Designation of bearing:UC203-11G2L3; B:31 mm; E:21 mm; s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; L:91 mm; G:R1/8"; T max.:100 °C;
komatsu 21S-35-21210 IDLER	L1:40 mm; Designation of open end cover:SCO204-15; Designation of bearing:UC202G2L3; J:97 mm; B:31 mm; Designation of closed end cover:SCC204; A:32 mm; H1:14.5 mm; Recommended tightening torque for set screw:5.5 Nm; H2:64 mm;
komatsu 14S-30-13110 IDLER	f:1.65 mm; Characteristic outer ring frequency, BPF0:3.05 Hz; Nref:11,000 rpm; Min operating temperature, Tmin:-40 °C; Mass:0.35 kg; ra max:1 mm; a max:3.28 mm; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:4.95 Hz; Max operating temperature, Tmax:120 °C;
komatsu 208-30-68210 IDLER	Designation of housing:FE207N-; J:92 mm; A2:44.5 mm; A:36 mm; N:14mm; Z:50.7 mm; d:35 mm; T min.:-40 °C; C0:15.2 kN; Designation of bearing:US207G2T04;
komatsu 20Y-30-13120 IDLER	Designation of housing:FE207N-; J:92 mm; A2:44.5 mm; A:36 mm; N:14mm; Z:50.7 mm; d:35 mm; T min.:-40 °C; C0:15.2 kN; Designation of bearing:US207G2T04;
komatsu 14X-30-12113 IDLER	Clearance sign:No; Low Torque Specification:No; Special Configurations Code:No; Raceway Ring Shape:Cylindrical Roller; Retainer Type:Punching; Precision Grade Symbol:No; Basic Load Rating, Dynamic Rating(N):25700; Seal, Shield Symbols:No; Internal Symbol:No;
komatsu 21W-30-36110 IDLER	Designation of open end cover:SCOU206-19; T max.:100 °C; G:M6x1; Designation of bearing:UC206-19G2L3; Weight:1.75 kg; T min.:-20 °C; J:121 mm; B:38.1 mm; C0:11.2 kN; A:50 mm;
komatsu X212191590KZ IDLER	Pillow Type, Category:Standard; Basic Load Rating Cr (Dynamic)(N):13200; Bearing Inner Dia. Shape:Eccentric Ring; RoHS:6; Volume Discount:Available; Unit, Type:Ball Bearing Units; B:36; Bearing Unit, Type:Pillow Blocks; Unit Body Material:[Cast Iron] Zinc All;
komatsu 134-30-62233 IDLER	Recommended tightening torque for set screw:22 Nm; B:68.2 mm; N:18mm; L:188 mm; Designation of housing:FE213-; A2:89.6 mm; Designation of bearing:EX213G2T20; A:56 mm; d1:86 mm; A1:18 mm;
komatsu 20Y-30-43310ST IDLER	S:14.3 mm; d:25 mm; L:115 mm; H3:70; Dz:60 mm; A1:7 mm; A:27 mm; J:90 mm; Designation of bearing:UC205G2L4; Recommended tightening torque for set screw:5.5 Nm;