komatsu X212191590KZ IDLER	Recommended tightening torque for set screw:22 Nm; B:68.2 mm; N:18mm; L:188 mm; Designation of housing:FE213-; A2:89.6 mm; Designation of bearing:EX213G2T20; A:56 mm; d1:86 mm; A1:18 mm;
komatsu X490000440KZ IDLER	Z:76.1 mm; T min.:-20 °C; s1:25.8 mm; S:19 mm; J:158 mm; L:200 mm; Designation of bearing:UC210-30G2L3; d:47.62 mm; Designation of housing:PE210N-; Dz:100 mm;
komatsu 175-30-23114 IDLER	f:1.65 mm; Characteristic outer ring frequency, BPF0:3.05 Hz; Nref:11,000 rpm; Min operating temperature, Tmin:-40 °C; Mass:0.35 kg; ra max:1 mm; a max:3.28 mm; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:4.95 Hz; Max operating temperature, Tmax:120 °C;
komatsu 17M-30-28110 IDLER	Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Bearing I.D. d(mm):6; RoHS:6; Bearing Part Number:626; Bearing Retained:No; Number of Bearings:Double; Seals:VV (Non-Contact Rubb;
komatsu 175-30-23114 IDLER	Characteristic cage frequency, FTF:0.4 Hz; Nlim (grease):13,000 rpm; ra max:1 mm; Characteristic rolling element frequency, BSF:4.71 Hz; B:15 mm; d:25 mm; Characteristic inner ring frequency, BPFI:5.42 Hz; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:3.58 Hz; da min:30 mm;
komatsu X212206840ST IDLER	C:12.8 kN; Designation of bearing:UC203-11G2L3; B:31 mm; E:21 mm; s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; L:91 mm; G:R1/8"; T max.:100 °C;
komatsu X210845870ST IDLER	C:12.8 kN; Designation of bearing:UC203-11G2L3; B:31 mm; E:21 mm; s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; L:91 mm; G:R1/8"; T max.:100 °C;
komatsu 124-30-51113 IDLER	Designation of housing:FE207N-; J:92 mm; A2:44.5 mm; A:36 mm; N:14mm; Z:50.7 mm; d:35 mm; T min.:-40 °C; C0:15.2 kN; Designation of bearing:US207G2T04;
komatsu 14X-30-31210 IDLER	Clearance sign:No; Low Torque Specification:No; Special Configurations Code:No; Raceway Ring Shape:Cylindrical Roller; Retainer Type:Punching; Precision Grade Symbol:No; Basic Load Rating, Dynamic Rating(N):25700; Seal, Shield Symbols:No; Internal Symbol:No;
komatsu 134-30-62233 IDLER	Recommended tightening torque for set screw:22 Nm; B:68.2 mm; N:18mm; L:188 mm; Designation of housing:FE213-; A2:89.6 mm; Designation of bearing:EX213G2T20; A:56 mm; d1:86 mm; A1:18 mm;