komatsu 20Y-30-43310 IDLER	Designation of housing:FE207N-; J:92 mm; A2:44.5 mm; A:36 mm; N:14mm; Z:50.7 mm; d:35 mm; T min.:-40 °C; C0:15.2 kN; Designation of bearing:US207G2T04;
komatsu 17M-30-28110 IDLER	Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Bearing I.D. d(mm):6; RoHS:6; Bearing Part Number:626; Bearing Retained:No; Number of Bearings:Double; Seals:VV (Non-Contact Rubb;
komatsu 175-30-23114 IDLER	f:1.65 mm; Characteristic outer ring frequency, BPF0:3.05 Hz; Nref:11,000 rpm; Min operating temperature, Tmin:-40 °C; Mass:0.35 kg; ra max:1 mm; a max:3.28 mm; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:4.95 Hz; Max operating temperature, Tmax:120 °C;
komatsu 130-30-13115 IDLER	f:1.65 mm; Characteristic outer ring frequency, BPF0:3.05 Hz; Nref:11,000 rpm; Min operating temperature, Tmin:-40 °C; Mass:0.35 kg; ra max:1 mm; a max:3.28 mm; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:4.95 Hz; Max operating temperature, Tmax:120 °C;
komatsu 22J-35-26100 IDLER	Designation of housing:FE207N-; J:92 mm; A2:44.5 mm; A:36 mm; N:14mm; Z:50.7 mm; d:35 mm; T min.:-40 °C; C0:15.2 kN; Designation of bearing:US207G2T04;
komatsu 21W-30-36110 IDLER	Designation of open end cover:SCOU206-19; T max.:100 °C; G:M6x1; Designation of bearing:UC206-19G2L3; Weight:1.75 kg; T min.:-20 °C; J:121 mm; B:38.1 mm; C0:11.2 kN; A:50 mm;
komatsu 125-30-13110 IDLER	C:12.8 kN; Designation of bearing:UC203-11G2L3; B:31 mm; E:21 mm; s1:15.5 mm; Recommended tightening torque for set screw:3.7 Nm; SW:3.18 mm; L:91 mm; G:R1/8"; T max.:100 °C;
komatsu 10G-30-23310 IDLER	Pillow Type, Category:Standard; Basic Load Rating Cr (Dynamic)(N):13200; Bearing Inner Dia. Shape:Eccentric Ring; RoHS:6; Volume Discount:Available; Unit, Type:Ball Bearing Units; B:36; Bearing Unit, Type:Pillow Blocks; Unit Body Material:[Cast Iron] Zinc All;
komatsu 154-30-74110 IDLER	L1:40 mm; Designation of open end cover:SCO204-15; Designation of bearing:UC202G2L3; J:97 mm; B:31 mm; Designation of closed end cover:SCC204; A:32 mm; H1:14.5 mm; Recommended tightening torque for set screw:5.5 Nm; H2:64 mm;
komatsu X212191590KZ IDLER	Volume Discount:Available; Bearing Material:52100 Bearing Steel; Bearing Retained:No; Type:Angular Contact Bear; Holder Surface Treatment:Black Oxide Coating; Width T(mm):75; Flange Shape:Round Type; RoHS:6; Cover Type Selection:R (for O-Ring);