Komatsu Steps 232-54-54911 Steps	H:54 mm; N1:23 mm; L1:60 mm; C:31.85 kN; Recommended tightening torque for set screw:8 Nm; d1:62 mm; J:146 mm; C0:20.8 kN; G:M6x1; N:17mm;
Komatsu Steps "195-15-15113 Valve seat	B:42.8 mm; d:41.28 mm; T max.:100 °C; H1:13 mm; B1:56.3 mm; A1:32 mm; H2:108 mm; G:M6x1; C:31.85 kN; J:90 mm;
Komatsu Steps 427-54-12141 Steps	Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Days to Ship:8 Days; Bearing Material:[Steel] Steel; Holder Surface Treatment:Not Provided; Bearing Retained:No; Bearing Part Number:6203; Number of Bearings:Double; RoHS:6;
Komatsu Steps 428-54-12561 Steps	Number of Bearings:Single; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type; Width T(mm):22; Shape:Flange Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; RoHS:6; Bearing Used:Deep Groove Ball Bea;
Komatsu Steps 573-54-51310 Steps	Unit, Type:Insert Bearing Unit; Days to Ship:8 Days; Pillow Type, Category:Standard; Unit Body Material:Cast Iron; d:100; Accessory:With cast iron cover; Basic Load Rating, Static Rating(N):141000; Rolling Element Material:Bearing Steel; Stroke:No;
Komatsu Steps 209-62-76340 Steps	Nlim (oil):9,600 rpm; r1a max:1 mm; Characteristic inner ring frequency, BPFI:8.76 Hz; Characteristic cage frequency, FTF:0.42 Hz; ra max:1 mm; da min:51.5 mm; Static load, C0:84.5 kN; rs min:1.1 mm; Radial clearance class:CN; Characteristic rolling element frequency, BSF:5.79 Hz;
Komatsu Steps "176-76-62220 Valve seat	Dw:3 mm; Characteristic outer ring frequency, BPF0:14.57 Hz; da min:44 mm; Characteristic rolling element frequency, BSF:16.61 Hz; d:42 mm; Inner ring reference:1R42X47X30; D:57 mm; ras max:0.3 mm; C0r:91.5 kN; s max:1 mm;
Komatsu Steps 20G-47-K3210 Steps	A2:32 mm; S:15 mm; T max.:200 °C; B:38 mm; C:22.36 kN; T min.:-20 °C; A:29 mm; C0:11.5 kN; Recommended tightening torque for set screw:5.5 Nm; G:M6x1;
Komatsu Steps 425-54-24510 Steps	B:42.8 mm; d:41.28 mm; T max.:100 °C; H1:13 mm; B1:56.3 mm; A1:32 mm; H2:108 mm; G:M6x1; C:31.85 kN; J:90 mm;
Komatsu Steps "176-76-62120 Valve seat	A2:32 mm; S:15 mm; T max.:200 °C; B:38 mm; C:22.36 kN; T min.:-20 °C; A:29 mm; C0:11.5 kN; Recommended tightening torque for set screw:5.5 Nm; G:M6x1;